Multifunctional properties of carbon fiber integrated cement composite – A review and insights

Dinesh, A.; Jayashree, J.; Abhishek, S.; Prakash, Amar

doi:10.1016/j.matpr.2023.05.559

Cited by 3 publications

(2 citation statements)

References 36 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Secondly, in cases where the fiber content is high, the conductivity may not accurately reflect the presence of fiber agglomerates. This could be attributed to the fiber content surpassing the percolation threshold, resulting in the matrix resistivity reaching a saturation point (Han et al, 2016;Zhu et al, 2021;Dinesh et al, 2023). Therefore, relying solely on conductivity measurements is insufficient to serve as the exclusive criterion for evaluating the dispersion degree of carbon fiber or recycled carbon fiber in the hardened matrix.…”

Section: Figurementioning

confidence: 99%

Research on the dispersion of carbon fiber and recycled carbon fiber in cement-based materials: a review

Gao,

Xia

2023

Front. Mater.

View full text Add to dashboard Cite

Recycled carbon fiber, as a novel form of regenerated fiber, exhibits exceptional properties such as high strength, high modulus, excellent electrical conductivity, and corrosion resistance. Consequently, it has garnered significant attention in recent years, owing to its potential to confer unique intelligent characteristics to cement-based materials. However, the dispersion of recycled carbon fiber remains an inevitable concern. Building upon existing research, this paper meticulously categorizes different types of recycled carbon fiber based on their mechanical properties and surface characteristics, while also exploring the impact of additives on fiber dispersion. Furthermore, a thorough evaluation of fiber dispersion methods is provided, considering the dimensions of stability, uniformity, and morphology at various stages, including fiber suspension, fresh mixture, and hardened matrix. Additionally, this paper offers a comprehensive summary and comparison of fiber dispersion methods, taking into account fiber pretreatment and preparation processes. Extensive literature reviews unequivocally support the notion that achieving a uniform dispersion of recycled carbon fiber serves as a fundamental requirement for enhancing and optimizing the properties of composites. Consequently, the utilization of dispersion and evaluation methods based on carbon fiber enables the exploration of appropriate dispersion methods tailored to different types of recycled carbon fiber in cement-based materials.

show abstract

Section: Figurementioning

confidence: 99%

Research on the dispersion of carbon fiber and recycled carbon fiber in cement-based materials: a review

Gao,

Xia

2023

Front. Mater.

View full text Add to dashboard Cite

show abstract

“…Although capacitance-based self-detection is less studied in the literature compared to resistance-based selfsensing, it is more likely to be widely used because it does not require any additive. Resistance-based self-sensing mechanism is based on the principle that the conductivity of the structure changes as a result of the deformation of the sufficiently conductive material with stresses, which requires conductive fillers to make the base material sufficiently conductive (Li and Ou 2009, Makul 2020, Taheri et al 2022, Li et al 2022b, Dinesh et al 2023, Elseady et al 2023, Hao et al 2023, Kim and Kim 2023, Qi et al 2023, Chung 2023a. For this reason, capacitance-based measurements provide the possibility of application in both existing and new structures (Ozturk and Chung 2021, Chung 2023b).…”

Section: Introductionmentioning

confidence: 99%

Capacitive self tension sensing properties of steel beam: electrode configuration and stress regime

Ozturk

2023

Phys. Scr.

View full text Add to dashboard Cite

Self-sensing for steel is valuable for the control and safety of steel structures such as buildings and bridges. The changes in the capacitance of steel in response to cyclic tensile stresses applied in low, medium and high stress regimes are measured by using a Inductnce-Capacitance-Resistance (LCR) meter. Coplanar and parallel plate electrode configuration is used for capacitance measurements. Aluminum foil is used as electrode. A steel beam of 100 mm in length, 30 mm in width and 2.5 mm in thickness is tensioned by holding it at both ends to produce direct tensile stresses in the material. The maximum stresses applied for low, medium and high stress regimes are 6.7 MPa, 33.3 MPa and 66.7 MPa. The capacitance value of the sample with coplanar and parallel plate electrode configurations measured without applying load are 203.42 pF and 196.00 pf, respectively. The fractional changes in capacitance are 0.059%, 0.192% and 0.275% when 6.7 MPa, 33.3 MPa and 66.7 MPa direct tensile stress is created in the steel beam. These values are 0.12%, 0.20% and 0.29% for parallel plate electrode configuration. Test results demonstrates that there is a relation between stress and fractional change in capacitance. In other words, measuring fractional change in capacitance gives information about the stress variations in the material. From the experimental results, parallel plate electrode configuration is found to be more effective in tensile stress self-sensing. In addition, the relationship between stress and fractional change in capacitance is more linear for both electrode configurations in the low stress regime. This paper aims to reveal the tensile stresses occurring in steel by means of capacitance-based sensing. Sensing capability in larger scale structures and factors effecting sensing sensitivity are to be addressed in future work.

show abstract

Graphene concrete: Recent advances in production methods, performance properties, environmental impact and economic viability

Alateah

2023

Case Studies in Construction Materials

View full text Add to dashboard Cite

Multifunctional properties of carbon fiber integrated cement composite – A review and insights

Cited by 3 publications

References 36 publications

Research on the dispersion of carbon fiber and recycled carbon fiber in cement-based materials: a review

Research on the dispersion of carbon fiber and recycled carbon fiber in cement-based materials: a review

Capacitive self tension sensing properties of steel beam: electrode configuration and stress regime

Graphene concrete: Recent advances in production methods, performance properties, environmental impact and economic viability

Contact Info

Product

Resources

About