Multifunctional Pacemaker Lead for Cardiac Energy Harvesting and Pressure Sensing

Abstract

Biomedical self‐sustainable energy generation represents a new frontier of power solution for implantable biomedical devices (IMDs), such as cardiac pacemakers. However, almost all reported cardiac energy harvesting designs have not yet reached the stage of clinical translation. A major bottleneck has been the need of additional surgeries for the placements of these devices. Here, integrated piezoelectric‐based energy harvesting and sensing designs are reported, which can be seamlessly incorporated into existing IMDs for ease of clinical translation. In vitro experiments validate the energy harvesting process by simulating the bending and twisting motion during heart cycle. Clinical translation is demonstrated in four porcine hearts in vivo under various conditions. Energy harvesting strategy utilizes pacemaker leads as a means of reducing the reliance on batteries and demonstrates the charging ability for extending the lifetime of a pacemaker battery by 20%, which provides a promising self‐sustainable energy solution for IMDs. The additional self‐powered blood pressure sensing is discussed, and the reported results demonstrate the potential in alerting arrhythmias by monitoring the right ventricular pressure variations. This combined cardiac energy harvesting and blood pressure sensing strategy provides a multifunctional, transformative while practical power and diagnosis solution for cardiac pacemakers and next generation of IMDs.

Development of Highly Crystalline Polylactic Acid with β-Crystalline Phase from the Induced Alignment of Electrospun Fibers

“…Among the three polymers, PVDF and its copolymers have been widely studied. Their high piezoelectric response is increasingly being used in an extensive range of technological applications, such as energy generation and storage [ 5 ], monitoring and control [ 6 ], biomedicine [ 7 ], sensors and actuators [ 8 ], and smart scaffolds [ 9 , 10 ]. In particular, piezoelectric materials applications involving interfaces with biological systems represent an exciting area of rapid development [ 11 , 12 ].…”

In-Vivo Microsystems: A Review

“…However, this also requires additional security to protect the system from unwanted intrusion [ 66 ]. Sensors such as pressure, oxygen saturation in addition to ECG can be used to optimize the operation of the system [ 67 , 68 ].…”

Experimentation of a Wearable Self‐Powered Jacket Harvesting Body Heat for Wearable Device Applications

“…Numerous research studies have focused on reducing the power consumption of the micro-electromechanical system (MEMS) and microelectronics for wearable biomedical sensors. Table 1 shows the operating features of wearable biomedical monitoring devices, such as (1) electrocardiogram (ECG) which is used for cardiac activity, (2) electroencephalography (EEG) which measures brain activity, (3) pulse oximeter which monitors oxygen saturation, (4) blood pressure sensor which is utilized to take blood pressure readings, (5) glucometer which is needed for sugar measurement, (6) hearing aid which is necessary for deaf people, and (7) pacemaker which is implanted in heart patients [6] to control an abnormal heart rhythm. Typically, the power requirements for wearable biomedical devices range from 0.003 to 500 mW, which can easily be produced by energy harvesting technology.…”