Multifunctional Ammonium Sulfide Enables Highest Efficiency Lead–Tin Perovskite Solar Cells

Abstract

The commonly used hole transport layer (HTL) Poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) still has some shortcomings that will limit the development of Pb–Sn perovskite solar cells (PSCs). In this work, multifunctional ammonium sulfide (AS) is attempted to modify PEDOT:PSS/perovskite interface. AS has multiple effects on different functional layers and the device as a whole: a) optimize the perovskite crystallization by the formation of PbS nucleation sites; b) neutralize the acidity of PEDOT:PSS by reaction with PSS; c) promote carrier transport at HTL/perovskite interface by tuning the energy level of PEDOT:PSS. As a result, a power conversion efficiency of 24.23% is obtained in the reverse scanning direction and 23.84% in the steady‐state output power test for the single‐junction Pb–Sn PSCs, and 27.48% for all‐perovskite tandem solar cells. These results show that AS modification can be an effective way to boost the development of Pb–Sn PSCs.