Morphological transformation of soot: investigation of microphysical processes during the condensation of sulfuric acid and limonene ozonolysis product vapors

Abstract

Abstract. The morphological transformation of soot particles via condensation of low-volatility materials constitutes a dominant atmospheric process with serious implications for the optical and hygroscopic properties, as well as atmospheric lifetime of the soot. We consider the morphological transformation of soot aggregates under the influence of condensation of vapors of sulfuric acid, and/or limonene ozonolysis products. This influence was systematically investigated using a Differential Mobility Analyzer coupled with an Aerosol Particle Mass Analyzer (DMA-APM) and the Tandem DMA techniques integrated with a laminar flowtube system. We hypothesize that the morphology transformation of soot results (in general) from a two-step process, i.e., (i) filling of void space within the aggregate and (ii) growth of the particle diameter. Initially, the transformation was dominated by the filling process followed by growth, which led to the accumulation of sufficient material that exerted surface forces, which eventually facilitated further filling. The filling of void space was constrained by the initial morphology of the fresh soot as well as the nature and the amount of condensed material. This process continued in several sequential steps until all void space within the soot aggregate was filled. And then "growth" of a spherical particle continued as long as vapors condensed on it. We developed a framework for quantifying the microphysical transformation of soot upon the condensation of various materials. This framework used experimental data and the hypothesis of "ideal sphere growth" and void filling to quantify the distribution of condensed materials in the complementary filling and growth processes. Using this framework, we quantified the percentage of material consumed by these processes at each step of the transformation. For the largest coating experiments, 6, 10, 24, and 58 % of condensed material went to filling process, while 94, 90, 76, and 42 % of condensed material went to growth process for 75, 100, 150, and 200 nm soot particles, respectively. We also used the framework to estimate the fraction of internal voids and open voids. This information was then used to estimate the volume-equivalent diameter of the soot aggregate containing internal voids and to calculate the dynamic shape factor, accounting for internal voids. The dynamic shape factor estimated based on the traditional assumption (of no internal voids) differed significantly from the value obtained in this study. Internal voids are accounted for in the experimentally derived dynamic shape factor determined in the present study. In fact, the dynamic shape factor adjusted for internal voids was close to 1 for the fresh soot particles considered in this study, indicating the particles were largely spherical. The effective density was strongly correlated with the morphological transformation responses to the condensed material on the soot particle, and the resultant effective density was determined by the (i) nature of the condensed material an...

Amplification of black carbon light absorption induced by atmospheric aging: temporal variation at seasonal and diel scales in urban Guangzhou

“…Photochemical reactions play an important role in the aging process of black carbon, leading to the modification of BC morphology and optical properties as evidenced by laboratory studies (Saathoff et al, 515 2003;Schnaiter et al, 2005;Martinsson et al, 2015;Pei et al, 2018) and quasi-atmospheric chamber studies (Peng et al, 2017;Peng et al, 2016). Filed studies at various locations have also showed that photochemical processing can promote the light absorption enhancement of BC, including in Beijing (Liu et al, 2019b), Yangtze River Delta (Xu et al, 2018c), Xi'an (Wang et al, 2017c), Los Angels (Krasowsky et al, 2016) and…”

More Than Emissions and Chemistry: Fire Size, Dilution, and Background Aerosol Also Greatly Influence Near‐Field Biomass Burning Aerosol Aging

“…Our rationale for using a fixed refractive index is to isolate how the changes in the aerosol size and number affect extinction. The particle extinction is also a function of potentially evolving particle morphology and refractive index in the plume during aging (Pei et al, 2018), but we do not attempt to address these changes here with justification given in the next paragraph.…”

A shape model of internally mixed soot particles derived from artificial surface tension

“…According to the biomass smoke measurement results, the size of dry particles was 0.10-0.16 µm at count median diameter (0.25-0.30 µm at volume median diameter) (Reid et al, 2005a). Laboratory and in situ measurements for aged biomass smoke yielded estimates of ω ≥ 0.75 and g ∼ 0.6 at λ = 532 nm (Reid et al, 2005b;Pokhrel et al, 2016). For lidar measurements, typical values of L ∼ 70 sr and δ L ∼ 7 % at λ = 532 nm have been reported (Groß et al, 2015a, b).…”