Morphological and functional characterization of electroplated Ni-graphene composite coatings

Abstract

Composite coatings (CECs) are providing a unique technological advantage for improving mechanical and tribological surface properties. Among different methods, electrodeposition is one of the most exploited to produce composite surface coatings on metal substrates. However, the process parameters affect graphene distribution, coating morphology and performance. This paper investigates how different deposition conditions influence the inclusion of large Graphene nanoplates (GnPs) in a Nickel matrix and the coating morphology and tribological performance. Set the process condition such as electrical parameters and the galvanic bath, the work focuses on the stirring rate effect. To this end, Ni-GnP coatings were obtained by a laboratory setup and evaluated through surface profilometry, SEM characterization and a dry-sliding linear reciprocating wear test. The results highlight the influence of stirring on coating uniformity. The low stirring rate allows larger particles to be embedded, which are not thoroughly covered; however, they act as a solid lubricant and reduce the friction coefficient.

Effect of Particle Concentration on the Microstructure and Properties of Electrodeposited Nickel–Diamond Composite Coatings

“…The electrodeposition technique has been extensively applied to prepare Ni composite coatings reinforced by oxides, carbides, nitrides, and so on, which endows the coatings with the desirable microstructure and properties [1][2][3][4][5][6][7][8][9][10]. Among the reinforcements, the diamond particle is considered as a prospective candidate, due to its excellent hardness, wear resistance, strength, chemical inertness, corrosion resistance, and so on [11][12][13][14].…”