Molecular dynamics study of cross‐linking degrees effect on the aging resistance of epoxy asphalt: Insights from oxygen diffusion

Abstract

To interpret the diffusion behavior of oxygen in epoxy asphalt with different cross‐linking degrees, epoxy asphalt‐oxygen diffusion layer models were constructed. The effect of temperature on oxygen diffusion and the number of oxygen molecules penetrating the epoxy asphalt was quantitatively analyzed. Fick's second law was used to determine the oxygen diffusion coefficient. The Mean square displacement (MSD) was extracted to analyze the effect of cross‐linking degree on the molecular motion of the base asphalt. The results show that as the cross‐linking degree increases, the number of oxygen in the epoxy asphalt decreases, accompanied by a reduction in the oxygen diffusion coefficient. Temperature significantly affects the rate of oxygen diffusion, with higher temperatures leading to greater diffusion depths over the same simulation time. The oxygen diffusion coefficient of epoxy asphalt ranges from 4.60 × 10−11 to 2.20 × 10−10 m2/s at temperatures of 298–373 K. The epoxy system markedly restricts the movement of base asphalt molecules, with saturate being most affected by cross‐linking degree and asphaltene the least. A high cross‐linking network impedes the asphalt‐oxygen contact oxidation, enhancing epoxy asphalt's anti‐aging capacity. These findings provide support for optimizing epoxy asphalt formulations and guiding the development of anti‐oxidant epoxy asphalt.