Modified Organosilica Core–Shell Nanoparticles for Stable pH Sensing in Biological Solutions

Abstract

Continuous monitoring using nanoparticle-based sensors has been successfully employed in complex biological systems, yet the sensors still suffer from poor long-term stability partially because of the scaffold materials chosen to date. Organosilica core-shell nanoparticles containing a mixture of covalently incorporated pH-sensitive (shell) and pH-insensitive (core) fluorophores is presented as a continuous pH sensor for application in biological media. In contrast to previous studies focusing on similar materials, we sought to investigate the sensor characteristics (dynamic range, sensitivity, response time, stability) as a function of material properties. The ratio of the fluorescence intensities at specific wavelengths was found to be highly sensitive to pH over a physiologically relevant range (4.5-8) with a response time of <100 ms, significantly faster than that of previously reported response times using silica-based particles. Particles produced stable, pH-specific signals when stored at room temperature for more than 80 days. Finally, we demonstrated that the nanosensors successfully monitored the pH of a bacterial culture over 15 h and that pH changes in the skin of mouse cadavers could also be observed via in vivo fluorescence imaging following subcutaneous injection. The understanding gained from linking sensor characteristics and material properties will inform the next generation of optical nanosensors for continuous-monitoring applications.

Amorphous silicon dioxide nanoparticles modulate immune responses in a model of allergic contact dermatitis

“…Amorphous SiNPs are approved by the United States Food and Drug Administration (FDA) for use as anti-caking agents in foods, drugs, and cosmetics 5 . Due to the perceived safety and the wide array of surface and structural modifications available, SiNPs are currently the subject of several studies examining potential uses for drug delivery 6–8 , bio-sensing 9 , and vaccination 10–13 .…”

Frontier luminous strategy of functional silica nanohybrids in sensing and bioimaging: From ACQ to AIE

“…Corrie's group reported core/shell SNs containing fluorescein (for pH sensing) in shell and pH‐insensitive fluorophores (Cyanine5) in core, which were employed for stable pH sensing in biological media. [ 146 ] Porosity of shell was induced with tannic acid aiming to enhance local mass transport and reduce nanosensor response time. Ratiometric fluorescence signals of the nanosensor were highly sensitive to pH in physiological range (4.5–8) with a fast response time.…”

Review: Nanomaterials for Reactive Oxygen Species Detection and Monitoring in Biological Environments

“…The design of these ratiometric nanosensors involves the addition of a secondary analyte-insensitive fluorophore to act as an internal reference and minimize erroneous measurements, either from signal drift or external environmental factors, while improving the signal-to-noise ratio (Huang et al, 2018;Bigdeli et al, 2019). Additionally, it has been reported that the particle concentration does not affect the signal output within a broad range (Robinson et al, 2018), making ratiometric sensors an attractive alternative. These sensors comprise two fluorophores, where both dyes are encapsulated separately within a nanoparticle scaffold, or one fluorophore is chemically attached onto the surface of a responsive nanoparticle (i.e.…”