Modification of Fibers and Matrices in Natural Fiber Reinforced Polymer Composites: A Comprehensive Review

Abstract

Application of natural fiber-polymer composites (NFPCs) in different industrial applications provides competitive edge due to their lightweight, higher specific mechanical properties than glass fibers, sustainability, and lower cost involved in production. There are certain challenges associated with natural fibers and their reinforcement in composites such as poor bonding between the fibers and matrix due to their contradictory nature of characteristics, moisture absorption, lower thermal properties, and poor interfacial adhesion between the natural fiber and polymer matrix. The challenges involved in NFPCs need to be overcome to produce materials with relatively equivalent properties to those of conventional composites and other metallic structures. Several researchers around the globe have conducted investigations with the primary attention being paid to the modification of natural fibers and matrix by employing surface treatments and other chemical treatment methods. In order to address the need for eco-friendly and sustainable materials in different domains, a comprehensive review on natural fibers and their sources, available matrix materials, modification techniques, mechanical and thermal properties of NFPCs, is needed for better understanding of the behavior of NFPCs. This work provides the information and holistic view of natural fiber-reinforced composites based on the results obtained from modification techniques, with the view of focusing the review in terms of different chemical and physical treatment techniques, modification of fibers and matrix, and enhanced mechanical and thermal properties in the composites.

Mechanical and thermal properties of flax/carbon/kevlar based epoxy hybrid composites

“…In the point of biodegradability, the composite CFFC is suitable for products development with a partially environmentally friendly nature. [61][62][63][64][65]…”

A review on epoxy granite reinforced polymer composites in machine tool structures – Static, dynamic and thermal characteristics

“…ArunRamnath in his research investigations reviewed and experimentally investigated the machining performance of various composite materials for determination of suitable optimization technique and ideal machining parameter combinations with regard to the selection of ideal machining parameters in end milling epoxy granite composites. [42][43][44][45][46][47][48][49][50][51] With a similar research methodology, the results of static, dynamic and thermal characteristics of research investigations of 70 different machine tool structures are identified and summarized and further the design methodologies employed are analyzed with the objective of enhanced performance and functionality of machine tool structures. This review work performed provides a clear ideology on machine tool structures and aids researchers, scientists and metallurgists in development of machine tool structures by epoxy granite composites and other polymer concrete reinforced composites with the objective of minimization of thermal errors without any trade-off among static and dynamic properties.…”

Effect of hybridization on natural fiber reinforced polymer composite materials – A review

“…They have appropriate mechanical properties for a wide range of applications such as excellent acoustic, mechanical, and thermal insulation properties. The use of plant‐based biodegradable “lignocellulosic” materials as fillers makes the product environmentally safe, and they are believed to be “environmentally superior” to composites made using glass fibers 19 …”

“…The use of plant-based biodegradable "lignocellulosic" materials as fillers makes the product environmentally safe, and they are believed to be "environmentally superior" to composites made using glass fibers. 19 Despite their numerous advantages, natural fibers are rarely used as thermoset reinforcements. Green composites based on biodegradable polymers and plant fibers appear to have some potential.…”