Modification Mechanism and Rheological Properties of Emulsified Asphalt Evaporative Residues Reinforced by Coupling-Modified Fiber

Abstract

In order to solve the problems of the smooth surface of basalt fiber and its weak interfacial adhesion with emulsified asphalt cold recycled mixture, a silane coupling agent (KH550) was used to treat the surface of basalt fiber and the effects of treatment concentration and soaking time on fiber modification were studied. The influence of silane coupling-modified basalt fiber (MBF) on the rheological properties of emulsified asphalt evaporation residue was studied at high and low temperatures using three routine index tests: a dynamic shear rheological test (DSR), a bending beam rheological test (BBR), and a force ductility test. The elemental changes of the fiber before and after modification and the microstructure of the emulsified asphalt evaporation residue with the coupling-modified fiber were analyzed by Fourier infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and X-ray energy dispersive spectroscopy (EDS), which is used to study the modification mechanism of emulsified asphalt evaporation residue reinforced by coupling-modified fiber. The results indicate that the concentration and soaking time of the silane coupling agent have a great influence on the surface morphology and mechanical properties of the fiber, and that the optimal treatment concentration is 1.0% and the optimal soaking time is 60 min. The addition of coupling-modified fibers can reduce the phase angle and unrecoverable creep compliance of emulsified asphalt evaporation residue, increase the rutting factor and creep recovery rate, and improve the elastic recovery ability and permanent deformation resistance. However, excessive fiber will weaken the ductility of emulsified asphalt at low temperatures. The appropriate content of silane coupling-modified fiber (MBF) is 1.5%. After silane coupling modification, the fiber surface becomes rough and cohesion is enhanced between the fiber and the emulsified asphalt base. Silane coupling-modified basalt fiber (MBF) acts as reinforcement for stability and bridging cracks.