Modeling of Typically Shaped Corn Seeds and Calibration of the Coefficient of Rolling Friction

Abstract

The shape of corn seeds not being spherical affects their mobility. This study focuses on modeling the typically shaped corn seeds and calibrating the coefficient of rolling friction for different shape types to improve simulation reliability. By analyzing the corn seed shape characteristics and size statistics, this study establishes a classification system that enables the determination of the average value and quantity of different types of corn seed using the spherical granule cluster method. The discrete element method is used to model simplified corn models, and contact parameters are validated through two types of repose angle and a seed metering experiment. In the collapse repose experiment, the relative error between the simulation and the experiment was only 0.72%, while the relative error in another repose experiment was 0.2%. The verification experiment for the metering of seeds showed that the relative error between the simulation and the experiment was below 15% at both low and high speeds, and the multi-grain rate error was less than 10%. This shows that the method proposed in this paper is somewhat accurate.