Modeling of the lifting of a heat transfer agent in a geothermal well of a gas condensate deposit

Fyk, Мykhailo; Biletsky, Volodymyr; Abbood, Mohammed; Al-Sultan, Mohammed Bassam; Abbood, Majid; Abdullatif, Haval Mohammed; Shapchenko, Yevhen

doi:10.33271/mining14.02.066

Cited by 8 publications

(10 citation statements)

References 19 publications

(41 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…It should be noted that today, modern technologies used for the manufacture of structural materials allow the use of smart composite materials for the production of drilling tools obtained by reinforcing the carbon matrix with carbon fiber material (carbon-carbonic compositional materials). In particular, drill pipes made of such materials demonstrate high economic efficiency in the oil and gas sector [102][103][104][105][106]. Therefore, for analysis, we chose another option-drill pipe based on composite carbon fiber material (modulus of elasticity in the axial direction of such material-5.6 × 10 4 MPa).…”

Section: Resultsmentioning

confidence: 99%

Influence of Heavy Weight Drill Pipe Material and Drill Bit Manufacturing Errors on Stress State of Steel Blades

et al. 2021

View full text Add to dashboard Cite

Drilling volumes should be increased in order to increase hydrocarbon production, but this is impossible without the usage of high-quality drilling tools made of modern structural materials. The study has to analyze the design, technological and operational methods to increase the performance of drilling tools made of various materials and has highlighted prospects of technological method applications. The scientific novelty of the study consists in the development of a new analytical model of PDC drill bit–well interaction. The developed model takes into account the drill bit manufacturing errors in the form of bit body–nipple axes misalignment on the drill bit strength. This result makes it possible to determine the permissible manufacturing errors to provide safe operation of the drill bit. It is established that there is an additional transverse force that presses the drill bit to the well wall in the rock due to manufacturing errors. It is determined that the magnitude of this clamping force can be significant. The material effect has been analyzed on additional clamping force. It is established that geometric imperfection of the drill bit causes the minimal effect for the elastic system of the pipe string, which includes a calibrator and is composed of drill pipes based on composite carbon fiber material, and the maximal effect—for steel drill pipes. Polycrystalline diamond compact (PDC) drill bit and well wall contact interaction during operation in non-standard mode is considered. Non-standard stresses are determined, and the strength of the blades is estimated for different values of drilling bit manufacturing error.

show abstract

Section: Resultsmentioning

confidence: 99%

Influence of Heavy Weight Drill Pipe Material and Drill Bit Manufacturing Errors on Stress State of Steel Blades

et al. 2021

View full text Add to dashboard Cite

show abstract

“…2 and gives a complete stheme picture of the double generation and utilization of electricity and heat in the case when actively extracting both local hydrocarbons and available local geothermal energy. Thermal energy in large quantities can be used as an auxiliary energy of technological processes in the extraction and transportation of natural gas and oil [6][7]. Unquestionably produced electricity can be used for the synthesis of useful fuels (hydrogen, methanol, gasoline) and synthesized methane on site.…”

Section: Review Of the Literaturementioning

confidence: 99%

Technological scheme of the combined geothermal-hydrocarbon system for the production and storage of energy resources

Fyk

Biletsky

Abbood³

et al. 2021

E3S Web Conf.

View full text Add to dashboard Cite

The complex researches of schemes of extraction and storage of hydrocarbons and geothermal energy are executed in the work. In particular, according to the location, logistics and nature of the processes of generation, transportation, evacuation, injection and local utilization of hydrocarbon and geothermal energy sources, the scheme is divided into subspecies of consumer regional order of electricity, hydrocarbon and chemical energy and hydrogen. It is shown that the tasks of extraction of natural or synthesized hydrocarbons, geothermal energy and subsequent transformation into the required form of commodity resource can be unified with the organization of circuit-combined technologies. At the same time, the developed technological scheme implements the concept of storage of the required amount of energy resources on the one hand and regulation of production capacity for consumption – on the other. The reduction of current energy costs for the implementation and operation of systems with updated functional systems for a total of 20–45%. It is proved that the selection of the scheme of unified extraction and storage energy systems in accordance with the projected order of energy and energy resources, due to the capabilities of productive reservoirs, leads to minimization of capital costs for their construction on a modular basis. Research of application of combined technologies of dual extraction-storage of heat carriers-hydrocarbons is a perspective direction of researches.

show abstract

“…The potential energy of the associated oil gas, when properly used, can serve to raise the production fluid to the surface [11][12][13][14]. Due to the gas adding to the water-oil mixture of the well, it is possible to reduce the fluids density to such level that it will even reduce the minimum required outlet pressure of the sucker-rod pump, which is used for oil well operation [15,16]. The paper in [17] describes the fundamental possibility of joint operation of the ground jet pump in the conditions of sinusoidal change of the working flow and the rod pump.…”

Section: Introductionmentioning

confidence: 99%

Strategy of Compatible Use of Jet and Plunger Pump with Chrome Parts in Oil Well

et al. 2021

View full text Add to dashboard Cite

During oil fields operation, gas is extracted along with oil. In this article it is suggested to use jet pumps for utilization of the associated oil gas, burning of which causes environmental degradation and poses a potential threat to the human body. In order to determine the possibility of simultaneous application of a sucker-rod pump, which is driven by a rocking machine, and a jet pump (ejector) in the oil well, it is necessary to estimate the distribution of pressure along the borehole from the bottomhole to the mouth for two cases: when the well is operated only be the sucker-rod pump and while additional installation of the oil-gas jet pump above its dynamic level. For this purpose, commonly known methods of Poettman-Carpenter and Baksendel were used. In addition, the equations of high-pressure and low-pressure oil-gas jet pumps were obtained for the case, when the working stream of the jet pump is a gas-oil production mixture and the injected stream is a gas from the annulus of the well. The values which are included in the resulting equations are interrelated and can only be found in a certain sequence. Therefore, a special methodology has been developed for the practical usage of these equations in order to calculate the working parameters of a jet pump based on the given independent working parameters of the oil well. Using this methodology, which was implemented in computer programs, many operating parameters were calculated both for the well and for the jet pump itself (pressures, densities of working, injected and mixed flows, flow velocities and other parameters in control sections). According to the results of calculations, graphs were built that indicate a number of regularities during the oil well operation with such a jet pump. The main result of the performed research is a recommendation list on the choice of the oil-gas jet pump location inside the selected oil well and generalization of the principles for choosing the perfect location of such ejectors for other wells. The novelty of the proposed study lays in a systematic approach to rod pump and our patented ejector pump operation in the oil and chrome plating of pump parts. The result of scientific research is a sound method of determining the rational location of the ejector in the oil well and the calculation of its geometry, which will provide a complete selection of petroleum gas released into the annulus of the oil well. To ensure reliable operation of jet and plunger pumps in oil wells, it is proposed to use reinforcement of parts (bushings, plungers, rods, etc.) by electrochemical chromium plating in a flowing electrolyte. This has significantly increased the wear resistance and corrosion resistance of the operational surfaces of these parts and, accordingly, the service life of the pumps. Such measures will contribute to oil production intensification from wells and improve the environmental condition of oil fields.

show abstract

Modeling of the lifting of a heat transfer agent in a geothermal well of a gas condensate deposit

Cited by 8 publications

References 19 publications

Influence of Heavy Weight Drill Pipe Material and Drill Bit Manufacturing Errors on Stress State of Steel Blades

Influence of Heavy Weight Drill Pipe Material and Drill Bit Manufacturing Errors on Stress State of Steel Blades

Technological scheme of the combined geothermal-hydrocarbon system for the production and storage of energy resources

Strategy of Compatible Use of Jet and Plunger Pump with Chrome Parts in Oil Well

Contact Info

Product

Resources

About