Modeling of the cutting head for treating holes in the railway

Mukanov, Ruslan; Kasenov, A. Zh.; Itybayeva, Galiya; Musina, Ž.; Strautmanis, Guntis

doi:10.1016/j.procs.2019.01.148

Cited by 9 publications

(5 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Acknowledgement: Authors express their gratitude to G. Itybayeva and A. N. Baltabekova who have articles published in similar journals [22,26], for their assistance in preparing and formatting this article.…”

Section: Discussionmentioning

confidence: 99%

“…In addition, the model editors of these packages are very complex and require extensive user training. The domestic module of finite element analysis APM feM, which is part of the CAD/CAe System APM Compass 3D, is to some extent an alternative to these software products [22][23][24][25].…”

Section: Table 3 -Mechanical and Chemical Properties Of T30k4 Hard Alloymentioning

confidence: 99%

“…Body material -stand 45, plate -T30K4. The hole diameter is 60 mm and the processing modes according to the calculations [22] are fixed on the body shank.…”

Section: Table 3 -Mechanical and Chemical Properties Of T30k4 Hard Alloymentioning

confidence: 99%

See 2 more Smart Citations

Untitled

2022

NiTK

View full text Add to dashboard Cite

НАУчНЫй жУрНАЛ ТорАйгЫров УНИвЕрСИТЕТ выходит 1 раз в квартал СвИдЕТЕЛЬСТво о постановке на переучет периодического печатного издания, информационного агенства и сетевого издания № KZ51VPY00036165 выдано Министерством информации и общественного развития Республики Казахстан Тематическая направленность публикация научных исследований по широкому спектру проблем в области металлургии, машиностроения, транспорта, строительства, химической и нефтегазовой инженерии, производства продуктов питания Подписной индекс -76129

show abstract

Section: Discussionmentioning

confidence: 99%

Section: Table 3 -Mechanical and Chemical Properties Of T30k4 Hard Alloymentioning

confidence: 99%

See 1 more Smart Citation

Untitled

2022

NiTK

View full text Add to dashboard Cite

show abstract

“…The most widely used Johnson-Cook model was chosen as a criterion for the destruction of the finite element mesh elements. The paper [8] presents the results of a study of the drilling process using a new cutting tool design -a sectional head with asymmetric carbide inserts of different widths. An engineering analysis of the proposed design was performed using APM WinMachine, which made it possible to design the tool with high quality and make functional decisions based on a comprehensive engineering analysis.…”

Section: Introductionmentioning

confidence: 99%

Calculation of the boring bar design for static rigidity and strength with simultaneous boring of a stepped hole with further optimization

Karsakova¹,

Sherov²,

Donenbayev³

et al. 2023

J Appl Eng Science

View full text Add to dashboard Cite

A method for simultaneous processing of stepped holes in the bedding of a submersible pump and the boring bar design is proposed. The results of the study of existing methods for processing stepped holes and the design of boring tools are presented. It was revealed that the considered methods and designs of tools cannot be used for processing stepped holes in the submersible pump frame. The calculation of the developed design of the boring bar for static stiffness and strength, as well as the calculation of the stress-strain state (SSS) of the cutting plates by the finite element method using the ANSYS program, was carried out. The purpose of calculating the boring bar for static stiffness is a finite element study of the radial displacement of the boring bar cutter plates in the process of machining a stepped hole. As a result, the value of deformation in the axial and radial directions, which occur at the top of the cutting plate, is established. Also, the values of the cantilever overhang of the boring cutters are established, under which the conditions for the static rigidity of the boring bar are met. Taking into account the obtained results, the boring bar design was optimized.

show abstract

“…Acknowledgments. The authors are grateful to M. Kairova, G. Itybayeva, A. Baltabekova and V. Yessaulkov [11,12] for preparing and collecting materials for this publication. E-mail: a.kairatolla@mail.ru…”

mentioning

confidence: 99%

Research on the Operational Qualities of a Mining Machine for the Development of Mineral Deposits

Abishev¹,

Kassenov²,

Mukanov³

et al. 2021

SGTS

View full text Add to dashboard Cite

E d i t o r i n c h i e f ZHURINOV MuratZhurinovich, doctor of chemistry, professor, academician of NAS RK, president of the National Academy of Sciences of the Republic of Kazakhstan, general director of JSC "Institute of fuel, catalysis and electrochemistry named after D.V. Sokolsky» (Almaty, Kazakhstan) H = 4 E d i t o r i a l b o a r d: ABSAMETOV Malis Kudysovich, (deputy editor-in-chief), doctor of geological and mineralogical sciences, professor, academician of NAS RK, director of the Akhmedsafin Institute of hydrogeology and hydrophysics (Almaty, Kazakhstan) H = 2 ZHOLTAEV Geroy Zholtaevich, (deputy editor-in-chief), doctor of geological and mineralogical sciences, professor, director of the institute of geological sciences named after K.I. Satpayev (Almaty, Kazakhstan) Н=2 SNOW Daniel, Ph.D, associate professor, director of the labotatory of water sciences, Nebraska University (Nebraska, USA) H = 32 Zeltman Reymar, Ph.D, head of research department in petrology and mineral deposits in the Earth sciences section of the museum of natural history (London, England) H = 37 PANFILOV Mikhail Borisovich, doctor of technical sciences, professor at the Nancy University (Nancy, France) Н=15 SHEN Ping, Ph.D, deputy director of the Committee for Mining geology of the China geological Society, Fellow of the American association of economic geologists (Beijing, China) H = 25 FISCHER Axel, Ph.D, associate professor, Dresden University of technology (Dresden, Germany) H = 6 KONTOROVICH Aleksey Emilievich, doctor of geological and mineralogical sciences, professor, academician of RAS, Trofimuk Institute of petroleum geology and geophysics SB RAS (Novosibirsk, Russia) H = 19 ABSADYKOV Bakhyt Narikbaevich, doctor of technical sciences, professor, corresponding member of NAS RK, Bekturov Institute of chemical sciences (Almaty, Kazakhstan) H = 5 AGABEKOV Vladimir Enokovich, doctor of chemistry, academician of NAS of Belarus, honorary director of the Institute of chemistry of new materials (Minsk, Belarus) H = 13 KATALIN Stephan, Ph.D, associate professor, Technical university (Dresden, Berlin) H = 20 SEITMURATOVA Eleonora Yusupovna, doctor of geological and mineralogical sciences, professor, corresponding member of NAS RK, head of the laboratory of the Institute of geological sciences named after K.I. Satpayev (Almaty, Kazakhstan) Н=11 SAGINTAYEV Zhanay, Ph.D, associate professor, Nazarbayev University (Nursultan, Kazakhstan) H = 11 FRATTINI Paolo, Ph.D, associate professor, university of Milano-Bicocca (Milan, Italy) H = 28 News of the National Academy of Sciences of the Republic of Kazakhstan. Series of geology and technology sciences.

show abstract

Modeling of the cutting head for treating holes in the railway

Cited by 9 publications

References 7 publications

Untitled

Untitled

Calculation of the boring bar design for static rigidity and strength with simultaneous boring of a stepped hole with further optimization

Research on the Operational Qualities of a Mining Machine for the Development of Mineral Deposits

Contact Info

Product

Resources

About