Modeling of Fracture Width and Conductivity in Channel Fracturing With Nonlinear Proppant-Pillar Deformation

Abstract

Channel fracturing acknowledges that there will be local concentrations of proppant that generate high-conductivity channel networks within a hydraulic fracture. These concentrations of proppant form pillars that maintain aperture. The mechanical properties of these proppant pillars and the reservoir rock are important factors affecting conductivity. In this paper, the nonlinear stress/strain relationship of proppant pillars is first determined using experimental results. A predictive model for fracture width and conductivity is developed when unpropped, highly conductive channels are generated during the stimulation. This model considers the combined effects of pillar and fracture-surface deformation, as well as proppant embedment. The influence of the geomechanical parameters related to the formation and the operational parameters of the stimulation are analyzed using the proposed model. The results of this work indicate the following: 1. Proppant pillars clearly exhibit compaction in response to applied closure stress, and the resulting axial and radial deformation should not be ignored in the prediction of fracture conductivity. 2. There is an optimal ratio (approximately 0.6 to 0.7) of pillar diameter to pillar distance that results in a maximum hydraulic conductivity regardless of pillar diameter. 3. The critical ratio of rock modulus to closure stress currently used in the industry to evaluate the applicability of a channelfracturing technique is quite conservative. 4. The operational parameters of fracturing jobs should also be considered in the evaluation. Conventional Channel fracturing Fig. 1-Schematic of (left) conventional fracturing and (right) channel fracturing (Gillard et al. 2010).

Characteristics and the formation mechanism of the heterogeneous microfractures in the tight oil reservoir of Ordos Basin, China

“…Tight oil is a type of crucial unconventional resource, and its enrichment rule and effective exploitation method are the focus and hot spot of domestic and foreign scholars (Ge et al, 2015;Du et al, 2015Du et al, , 2016Zhu et al, 2019;Du et al, 2020). As we all know, as the significant attributes of unconventional oil and gas reservoirs, microfractures have been paid more and more attention (Wang et al, 2018;Du et al, 2018aDu et al, , 2018bDai et al, 2019).…”

Mechanism of Connecting Natural Caves and Wells Through Hydraulic Fracturing in Fracture-Cavity Reservoirs

“…Many numerical methodologies have been formulated to simulate fracturing. The finite element method (FEM), which is widely used in engineering, is also used to simulate hydraulic fracturing (Salimzadeh et al 2017;Zhu et al 2019). To simulate fracturing without remeshing, advanced numerical methodologies have been proposed, including the peridynamic method (Zhou and Wang 2016) and general particle dynamics methods (Zhou et al 2015).…”