Modeling Flaw Pulse-Echo Signals in Cylindrical Components Using an Ultrasonic Line-Focused Transducer with Consideration of Wave Mode Conversion

Abstract

Investigations on flaw responses can benefit the nondestructive testing of cylinders using line-focused transducers. In this work, the system function, the wave beam model, and a flaw scattering model are combined to develop an ultrasonic measurement model for line-focused transducers to predict flaw responses in cylindrical components. The system function is characterized using reference signals by developing an acoustic transfer function for line-focused transducers, which works at different distances for both planar and curved surfaces. The wave beams in cylindrical components are modeled using a multi-Gaussian beam model, where the effects of wave mode conversion and curvatures of cylinders are considered. Simulation results of wave beams are provided to analyze their propagation behaviors. The proposed ultrasonic measurement model is certified from good agreement between the experimental and predicted signals of side-drilled holes. This work provides guidance for evaluating the detection ability of line-focused transducers in cylindrical component testing applications.

Measuring the Wall Thickness of a Trailing Arm Using Ultrasonic Measurement Model

“…In practical applications, the system influence factor is usually obtained by a direct measurement in a calibration setup, where the pulse-echo wave from a front planar surface at normal incidence is measured [13]. Combing the system function and transfer function, the frontwall and backwall echo can be predicted according to Equation (4).…”

Ultrasonic field analysis with local interface curvature effect based on the multi-Gaussian beam model

“…For example, by introducing the interface curvature dependent diffraction attenuation correction into attenuation evaluation method, the measurement error could be reduced (Zhang et al, 2016). In NDT, with the consideration of interface curvature while calculating of transfer function could make the calibrations show good agreement (Wang et al, 2019). The elements with different sizes of linear phased-array ultrasonic transducer were adjusted to get optimal focusing beams so as to be suitable for the tube with different curvatures (Xiao et al, 2019).…”

Monitoring the cleaning of food fouling in pipes using ultrasonic measurements and machine learning

“…Ultrasonic techniques can be used successfully on cylindrical pipes for applications such as flow monitoring (Al-Aufi et al, 2019). However it is known that the amplitude of reflected US wave reduces as the curvature of a pipe increases (W. Wang, Liu, Li, Xu, & Zhang, 2019). This may limit the capability of US techniques to accurately detect the presence of fouling in industrial environments, especially when only a small degree of fouling is present.…”