Modeling Erosion Wear Rates in Slurry Flotation Cells

Abstract

In processes using slurry as the working fluid, wear due to solid particles impinging on elements of the process units is a serious reliability issue. This study considers modeling wear damage in flotation cells, which are widely used in mineral processing. Flotation cells are typically cylindrical vessels where an impeller is used to agitate the fluid, enabling the liberation of the minerals from the slurry. Some solids, particularly those entrained in the impeller stream, can impact on the wall of the cell, leading to material loss and eventually to loss of structural integrity. The problem of predicting the remaining life of the unit due to erosion requires understanding of various sub-processes: flow modeling, particle-fluid interaction, energy interactions at the surface, and the mechanism of erosion itself. In this study, empirically developed equations for the flow field of cylindrical mixing vessel with a Rushton turbine are used in formulating a model relating and the damage accumulation rate to a simple set of measurable variables. To validate a model, a PIV technique was used to measure velocities in the flow field and near the wall on a physical model of the cell with transparent walls and particles that match the refractive index of the fluid. An Eulerian-Langrangian approach has been used to determine the particle trajectories and the effect of a squeeze film is incorporated into the model to modify the velocity distribution of particles prior to impacts. An analytical model based on equations of impulse and momentum for a particle of any shape striking a flat massive surface has been used to describe the energy lost at the walls. Finally, a damage model is developed that takes into account impact velocity, attack angle, properties of the impinging particles and the surface. This model is verified against a second physical model that measures material loss rate at different locations within the cell.

Investigation of Micro- and Nanosized Particle Erosion in a 90° Pipe Bend Using a Two-Phase Discrete Phase Model

“…Therefore, the equation of motion can be simplified to the following form: where [ 27 ] wherein Re p is the particle Reynolds number and is given as [ 28 – 30 ] …”

Rapid Wear Modelling in a Slurry Pump Using Soft 3D Impeller Material

“…Some techniques do allow for short assessment of the wear rate on a surface without running a component to failure. The multilayer paint technique, used by Wu et al [1] Lipsett and Bhushan [2] and others, is a fast qualitative visualization method for determining the high wear regions of a turbo machine, or a stationary vessel with slurry flowing through it. Results using this method are helpful to designers interested in modifying impeller and casing geometry; however, this method can quantify the wear rate only with controlled paint layers (thickness and material properties), which is hard to standardize because of the dependence of the paint application method.…”