Model and experiments to investigate thermal runaway characterization of lithium-ion batteries induced by external heating method

A review on battery thermal management and its digital improvement‐based cyber hierarchy and interactional network

“…The model is in good experimental agreement with the results of adiabatic TR tests and oven experiments for 24 Ah LIBs. The results show that the model can respond well to the thermal runaway mechanism of the battery 170 . Abada et al developed a three‐dimensional physical model of the electrothermal behavior of LIBs under thermal runaway conditions.…”

“…The results show that the model can respond well to the thermal runaway mechanism of the battery. 170 Abada et al developed a three-dimensional physical model of the electrothermal behavior of LIBs under thermal runaway conditions. The combination of experimental and modeling analysis enables an excellent understanding of the mechanisms of thermal runaway in LIBs and the implications for battery aging.…”

Electrolyte additive strategy enhancing the electrochemical performance of a soft-packed LiCoO2//graphite full cell

“…7 The energy storage principle of lithium-ion batteries is also well known, as a "rocking-chair battery" because lithium ions shuttle between the positive and negative electrodes to participate in electrochemical reactions through the electrolyte for realizing energy storage and release. 8 Herein, its development is limited by the instability of the electrode/electrolyte interface. Addressing this issue depends on an in-depth understanding of the basic chemistry of the high-energy battery electrode/electrolyte interface.…”

Side plate‐based cell‐to‐pack LiNi 0 . 5 Co 0 . 2 Mn 0 . 3 O 2Wang1, Chen2, Du3 2021Intl J of Energy ResearchSelf Cite14040View full textAdd to dashboardCite

“…6 However, the heat generation problem becomes severer, which causes the overheating issue, such as thermal runaway. 7 Feng et al 2 analyzed the thermal modeling of lithium-ion batteries and proposed solution perspectives for the thermal issues of battery EV applications. Fei et al 8 proposed a thermo-electrochemical model for SOC-temperature co-estimation.…”

“…Besides, novel modules/packs were designed to further enhance the energy density, such as the cell‐to‐pack (CTP) design and cell to chassis (CTC) 6 . However, the heat generation problem becomes severer, which causes the overheating issue, such as thermal runaway 7 . Feng et al 2 analyzed the thermal modeling of lithium‐ion batteries and proposed solution perspectives for the thermal issues of battery EV applications.…”