Mobile LiDAR Scanning System Combined with Canopy Morphology Extracting Methods for Tree Crown Parameters Evaluation in Orchards

Abstract

To meet the demand for canopy morphological parameter measurements in orchards, a mobile scanning system is designed based on the 3D Simultaneous Localization and Mapping (SLAM) algorithm. The system uses a lightweight LiDAR-Inertial Measurement Unit (LiDAR-IMU) state estimator and a rotation-constrained optimization algorithm to reconstruct a point cloud map of the orchard. Then, Statistical Outlier Removal (SOR) filtering and European clustering algorithms are used to segment the orchard point cloud from which the ground information has been separated, and the k-nearest neighbour (KNN) search algorithm is used to restore the filtered point cloud. Finally, the height of the fruit trees and the volume of the canopy are obtained by the point cloud statistical method and the 3D alpha-shape algorithm. To verify the algorithm, tracked robots equipped with LIDAR and an IMU are used in a standardized orchard. Experiments show that the system in this paper can reconstruct the orchard point cloud environment with high accuracy and can obtain the point cloud information of all fruit trees in the orchard environment. The accuracy of point cloud-based segmentation of fruit trees in the orchard is 95.4%. The R2 and Root Mean Square Error (RMSE) values of crown height are 0.93682 and 0.04337, respectively, and the corresponding values of canopy volume are 0.8406 and 1.5738, respectively. In summary, this system achieves a good evaluation result of orchard crown information and has important application value in the intelligent measurement of fruit trees.

BIM Supported Surveying and Imaging Combination for Heritage Conservation

“…The drone is equipped with a GPS and a 6-axis Inertial Measurement Unit (IMU) that grants the drone hovering and positioning during image acquisition, according to mathematical principles presented in Hosseinyalamdary et al [21]. A ground-based LIDAR is used instead of an onboard one so that further corrections such as those proposed by Zhang et al [22] or Wang et al [23] are not required. Lens calibration is ensured by following the maker's procedure at the very first time the drone is used and at specific service intervals.…”

3D Point Cloud Data in Conveying Information for Local Green Factor Assessment

“…Both deep learning and machine learning techniques [78] have been tested and deployed in point cloud data analysis, leading to promising results in urban point cloud classification via algorithms, such as random forest [79] and presence and background learning [80], and also via deep-learning architectures, such as SPGraph [81]. Tree attributes, such as canopy and stem surveying-based quantitative methods, have already been widely studied for forestry e.g., [35][36][37]82,83]. For green factor-like evaluations, questions around quality as well as the variety of objects and species arise.…”

TDPPL-Net: A Lightweight Real-Time Tomato Detection and Picking Point Localization Model for Harvesting Robots

“…One of the most crucial steps in tomato production is harvesting, which is still mainly done manually with a high level of labor intensity and high cost to farmers. Intelligent harvesting robots [1]- [5] that can pick tomatoes or other fruits without inflicting damage have recently emerged thanks to the advancement of machine vision. Robotic harvesting has the potential to significantly reduce labor costs and increase productivity.…”