Microthermomechanical infrared sensors

Abstract

We present a state-of-the-art overview of microthermomechanical infrared sensor technology. The working principle of this sensor is based on a bi-material actuated micromechanical deflection, generated by an induced temperature rise due to incident infrared radiation absorption. In order to generate a thermal image the thermomechanical deflections of the freestanding microstructures are read by either capacitive, piezoresistive or optical means. Research and development activities in this field began in the early 1990s. The development of this technology within the last 20 years has resulted in innovations such as uncooled multiband infrared detection, high-speed infrared sensing and uncooled THz imaging. This paper outlines representative milestones of this technology and analyses important results of notable groups. Significant activities on capacitive and optical readout techniques of thermomechanical infrared arrays are presented. Furthermore the advantages of microthermomechanical infrared sensors over current well-established uncooled infrared technologies are summarized. In conclusion the latest developments of this technology offer a highly potential solution for a variety of important energy-saving, safety and security applications.

Electronic Infrared Sensors

“…One method by which this may be done is by the cantilever as part of a capacitor [10]. By measuring changes in capacitance, the movement of the cantilever can be found.…”

Dual-Level Capacitive Micromachined Uncooled Thermal Detector

“…This out-of-plane motion can be sensed optically [7][8][9], or electrically through a piezoresistive material [10]. The latter suffers from temperature sensitivity concerns since the piezoresistive effect is inherently temperature dependent [11], while the former requires a bulky optical readout that is not suitable for emerging applications that need to be compact and low-cost [12]. A proposed third readout mechanism was introduced in [13], where the structure's head movement is measured capacitively.…”

Triglycine sulphate and its deuterated analog in polyurethane matrix for thermal/infrared detection: A comparison

“…17,[21][22][23][24][25] One recent and important application is their use is in waste energy harvesting for microelectric generators. The detected energy in the form of temperature rise is transformed into electrical pulses proportional to the temperature difference between the surfaces of the detector.…”

“…The uncooled pyroelectric infrared detectors are in great demand for many applications and a few of them are: atmospheric temperature measurement, earth position sensing, infrared detection, fire alarm operation, pollution detection, remote sensing, biomedical imaging etc. 17,[21][22][23][24][25] One recent and important application is their use is in waste energy harvesting for microelectric generators. 26 In this paper, we discuss the properties of TGS/PU and DTGS/PU composites for pyroelectric infrared detection applications.…”