Microstructure evolution, mechanical properties and high temperature deformation of (TiB + TiC)/Ti–3.5Al–5Mo–6V–3Cr–2Sn–0.5Fe titanium alloy

Yang, Jianguo; Wei, Shaolou; Ji, Wei; Chang, Ruohan; Lu, Zichuan; Xiao, Shulong; Chen, Yuyong; Zhou, Haitao

doi:10.1016/j.matchar.2021.111616

Cited by 15 publications

(1 citation statement)

References 40 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…According to recent studies, the (TiB + TiC) reinforcements can be the possible nucleation sites for the α-and β-phases and thus minimizing the deformation steps and decreasing the cost. Therefore, the Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe alloy with an excellent deformability and a high strength, via the (TiB + TiC) reinforcement, can achieve both less deformation steps and high mechanical properties [13,14].…”

Section: Introductionmentioning

confidence: 99%

A study on the hot workability of a novel TNM-RE alloy (RE = Y, La, Ce)

Chen

Ma²,

Xing³

et al. 2023

Mater. Res. Express

View full text Add to dashboard Cite

The hot deformation behavior of a novel TNM-RE alloy (RE=Y,La,Ce) was studied using a hot simulation machine (Gleeble-3800), and microstructural evolution was also characterized. Finally, 3D forging was carried out on isothermal forging equipment. It is shown that the as-cast lamellar colony size is about 20~30 μm, which is refined by the formation of rare earth oxides and borides at grain boundaries inhibiting grain growth. The peak stress of the TNM-RE alloy deformed at 1200 ℃/0.01s-1 is about 97 MPa, which is governed by the lamellar colony size and the B2 phase. Based on microstructure observation, it is found that the lamellar is bent and elongated to coordinate plastic deformation, where dynamic recrystallization nucleates preferentially, and full dynamic recrystallization is obtained at 1220 ℃/0.01s-1. The TNM-RE alloy was forged by 3D isothermal forging method, and fine grains with a size of 10~20 μm were obtained by controlling the process parameters. The novel TNM-RE alloy shows an excellent hot workability.

show abstract

Section: Introductionmentioning

confidence: 99%