Microstructure and Properties of Phosphorus Bronze/Brass Joints Produced by Resistance Projection Welding

Abstract

In this work, we fabricated lap joints between embossed projection phosphorus bronze and flat brass through resistance projection welding (RPW). The experimental results indicated that the bronze projection moves into the softer brass without being deformed during the welding process. The tensile shear loads of the joint reached a maximum value of 273.6 N at a welding current of 5.5 kA. Under this circumstance, a reaction layer, including a columnar crystal solidification layer and a diffusion layer, is formed at the interface beside the boundary of bronze. The EDS line scan shows an elemental transition diffusion layer of about 1.5 μm between the H62 brass columnar crystal and XYK-6 phosphorus bronze. The fracture occurred on the XYK-6 side, passing through the bump instead of the welding interface, resulting in intactness of the welding interface. The results revealed that resistance projection welding is an effective method for welding copper alloys, suggesting the bright prospects of this technology in welding electrical parts.

Brazing of Copper Pipes for Heat Pump and Refrigeration Applications

“…Nowadays, the implementation of electrical components and devices has grown exponentially in several sectors, as is the case, for example, in the automotive sector. This increase in the demand and use of copper alloys means there is a need to improve the welding quality, efficiency, and automation of welding these alloys, for better and easier integration into an industrial process [11,12].…”