Microstructure and Mechanical Properties of Ti Particles Reinforced AZ31-Mg Alloy Matrix Composites Through ARB and Subsequent Annealing

Alobaid, Baleegh

doi:10.1007/s13632-022-00888-1

Cited by 6 publications

(4 citation statements)

References 43 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…After that, hot extrusion was applied at 350 °C with an extrusion ratio of 20.25:1. Alobaid 83 produced AZ31/Ti composites by ARB. Before stacking AZ31 layers, the reinforcement particles were distributed on the surfaces.…”

Section: Other Methodsmentioning

confidence: 99%

“…Alobaid et al 83 reported that the UTS and YS of the composites decreased with increasing Ti content (except 2.3Ti). Under tensile load, when the local stress is higher than the bonding strength, the stress concentration around the Ti particles causes local damage.…”

Section: Strengthening Mechanismsmentioning

confidence: 98%

“…Bakhsheshi-Rad et al 66 reported that the agglomeration of CNTs for high content (0.8 wt-%) led to accumulation of dislocations, which caused crack creation and decreased failure strain. Chen et al 70 reported that the agglomeration of GO (for 0.3 wt-%) caused larger stress concentration, interfacial 83 debonding and crack initiation. This led to shorter strain hardening, premature necking and lower elongation.…”

Section: Orowan Mechanismmentioning

confidence: 99%

“…Figure 26. SEM images of the fracture surface of the samples: (a,b)AZ31, (c,d) AZ31/2.3 Ti, and (e,f) AZ31/8.6 Ti 83. …”

mentioning

confidence: 99%

See 3 more Smart Citations

Recent advances in mechanical properties of Mg matrix composites: a review

Aydın

2024

Materials Science and Technology

View full text Add to dashboard Cite

Magnesium (Mg), with a density of two-thirds of aluminium (Al) and one-fourth of steel, has become one of the most attractive materials for automotive and aerospace industries owing to the obligation to reduce fuel consumption and gas emissions. However, the poor mechanical property of Mg is one of the most significant barriers to its widespread use. The most widely used method to increase the use potential of Mg is the development of Mg matrix composites. This review focuses on the mechanical properties of recent Mg matrix composites. The effect of different reinforcement materials on the mechanical behaviour and failure mechanisms of Mg matrix composites was evaluated in detail.

show abstract

Section: Other Methodsmentioning

confidence: 99%

Section: Strengthening Mechanismsmentioning

confidence: 98%