Microstructural Evolution during the Dynamic Deformation of High Strength Navy Steels

Abstract

Tihe public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspec of this collection of information, including suggestions for reducing the burden, SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR'S ACRONYM(S)Office of Naval Research Regional Office Boston NA 495 Sumner Street Room 627Boston, MA 02210-2109 SPONSOR/MONITOR'S REPORT NUMBER(S) NA DISTRIBUTION/AVAILABILITY STATEMENTApproved for Public Release; Distribution is Unlimited SUPPLEMENTARY NOTES None ABSTRACTWe have characterized the propensity for adiabatic shear band formation (an associated microstructural evolution) under dynamic deformation conditions in an ultra-high strength (160 Ksi/1.1GPa) Fe-10 Ni-0.IC-Cr,Mo,V steel and demonstrated that this steel is highly prone to shear localization and failure. In the as-received condition, the steel has a lath martensite microstructure. During dynamic deformation, shear localization occurs and manifests by an optically visible shear band; the original microstructure is discernible within the band. With progression in severity of localization, there is evidence for a central region within the shear band composed of -300 nm size equiaxed grains constituting austenite, with a low dislocation content, and heavily twinned ferrite. In the extreme situation, a crack "chases" the shear band, and examination of the resulting fracture surfaces provides evidence for the presence of a thin liquid film layer. We have also observed that lowering the Ni content in the alloy significantly and adding Cu to the alloy, enables improvements in resistance to shear localization, both in terms of initiation and propagation of the shear band. SUBJECT TERMSadiabatic shear band formation, dynamic deformation, ultra-high strength 1ONi steel, microstructural evolution, lath martensite microstructure, shear localization Executive SummaryWe have characterized the propensity for adiabatic shear band formation under dynamic deformation conditions in an ultra-high strength (160 Ksi/1.IGPa) lONi steel and demonstrated that in spite of its outstanding static toughness, this steel is highly prone to shear localization and failure. Specifically, microstructural evolution during deformation of a Fe-10 Ni-0. 1 C-Cr,Mo,V steel was examined. In the as-received condition, the steel has a lath martensite microstructure, and during quasi-static deformation, shear appears to be accommodated by lath rotation and lath thinning. During dynamic deformation, shear localization occurs and manifests by an optically visible shear band. Initially, the original microstructure is discernible within the band. With progression in severity of localization, there is evidence for a central region within the shear band composed of -300 nm size equiaxed grains...