Microplastic fibre releases from industrial wastewater effluent: a textile wet-processing mill in China

Abstract

Environmental contextMicroplastic fibres (MPFs) released from textiles are routinely found throughout the environment as an indicator of human impacts. The presence of MPFs in industrial wastewater effluents shows that attention should be placed not only on domestic release but also on the upstream processes of textile production. In the context of global MPF release, the ability to target and treat industrial effluents may significantly reduce a potentially major point source. AbstractMicroplastic fibres (MPFs) released from textiles are routinely found throughout the environment indicating human impacts on natural systems. The most common release pathway to the environment investigated are domestic textile laundering, transport through and retention in municipal wastewater treatment plants and subsequent application of processed sludge onto agricultural fields as soil amendment. A less-studied but potentially equally relevant source is releases further upstream in the textile production chain such as industrial wastewater effluents from textile processing mills. In this context, industrial wastewater from a typical textile wet-processing mill in China was sampled to estimate MPF release. Effluent was sampled and MPF fibre number and length were quantified by stereomicroscope. An average of 361.6±24.5 MPFs L−1 was identified in the mill effluent. MPF length was highly variable, yet 92% of all fibres were shorter than 1000µm. Additionally, the sampling strategy was used to identify the optimal volume necessary to adequately subsample the effluent. We found that total fibre counts were linearly correlated with sample volumes between 1 and 10L, but a sampling volume of 5L is suggested for good reproducibility, low standard deviation and ease of working volume. The significant abundance of MPFs in the industrial wastewater effluent emphasises that not only should attention be placed on domestic releases, but the production stage of textiles can also be responsible for MPF pollution. The ability to target and treat industrial effluents may significantly reduce a potentially major point source.

Formation of Fiber Fragments during Abrasion of Polyester Textiles

“…Microplastic fibers (MPFs) are one of the dominant types of microplastics found in environmental samples, − suggesting that synthetic textiles may be an important source of microplastics to the environment. For aquatic systems, one study estimated that about 35% of the global releases of microplastics into the ocean originated from washing of synthetic textiles .…”

Microplastics in ecosystems: their implications and mitigation pathways

“…98 For example, effluent from a textile wet processing mill contained 361.6 ± 24.5 microfibres per L, and most of them (92%) were shorter than 1000 μm. 95 Although wastewater treatment plants (WWTPs) can remove larger MP particles, they are noted to be inefficient for removing smaller particles (<100 μm) which remain in the effluent released into aquatic ecosystems. Consequently, a WWTP annually may release more than 100 billion MP particles.…”

Nanoplastics measurements in Northern and Southern Polar Ice

“…The next most important nanoplastic types at the Greenland site were PET and Tire, with respective relative contribution of 21 and 24%. PET fibres are associated with the clothes and clothing industry (Chan et al, 2021;Liu et al, 2021). It is also extensively used in bottle productions (e.g.…”