Microphase Separation in Ion Containing Polyurethanes

Abstract

Public Reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comment regarding this burden estimates or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for information Operations and Reports. 1215 We have studied the viscoelastic behavior of polyurethane melts to obtain a greater fundamental understanding of phase separation in multiblock polyurethane copolymers with coulombic and coordination interactions. Two series of non-crystallizable aliphatic polyurethanes and its cationmers that flow at relatively low temperatures and are more thermally stable than commercial materials were synthesized. The effects of three principal parameters (block length N, block incompatibility \, and composition) on microstructure and rheological properties of polyurethane elastomers were examined. A separate part of this report involves synthesis and characterization of polyurethanes with monodisperse, hydrophobic soft segments. We have prepared and evaluated the mechanical and solvent sorption properties of a series of polyurethane elastomers based on three different types of soft segments with five different molecular weights. Both mechanical and solvent sorption properties are found to be dependent on hard segment content, hard segment chemistry, properties of the polyol, and the order of the hydrogenation and polymerization reactions. IntroductionPolyurethane elastomers are microphase-separated multiblock copolymer of the type (AB) n where at the service temperature one block of the material is glassy or semicrystalline, and the other block is soft or rubbery. Polyurethane chemistry offers tremendous versatility, and an almost limitless variety of chemical components and compositions are possible. The resulting wide range of physical properties have led to commercial applications of polyurethanes in such areas as flexible foams, tough elastomers, engineering thermoplastics, and durable coatings. They owe their good elastomeric properties to microphase separation of the blocks driven by segmental incompatibility. Micro-phase separation can be further enhanced by interurethane hydrogen bonds and/or crystallization. Consequently, microphase separation can occur at segment molecular weights lower than 1000. This is in marked contrast to the amorphous styrene-diene block polymers where due to weaker van der Waals interactions, microphase separation requires segment molecular weights approaching 10,000. Since phase mixing is entropically favored, an increase in temperature can cause a Microphase Separation Transition (MST) from a microphase separated to a single phase state. Such a MST has been studied extensively in diblock and triblock systems by scattering, calorimetric and rheological methods. There...