Microbent optical fibers as evanescent wave sensors

Abstract

Microbent optical fibers are potential candidates for evanescent wave sensing. We investigate the behavior of a permanently microbent fiber optic sensor when it is immersed in an absorbing medium. Two distinct detection schemes, namely, bright-field and dark-field detection configuration, are employed for the measurements. The optical power propagating through the sensor is found to vary in a logarithmic fashion with the concentration of the absorbing species in the surrounding medium. We observe that the sensitivity of the setup is dependent on the bending amplitude and length of the microbend region for the brightfield detection scheme, while it is relatively independent of both for the dark-field detection configuration. This feature can be exploited in compact sensor designs where reduction of the sensing region length is possible without sacrificing sensitivity. © 2002 Society of Photo-Optical Instrumentation Engineers.

Chemical sensing through multiple light taps in plastic optical fiber

“…The purpose of using such a large diameter fiber is to overcome light-coupling limitations. Unlike other techniques which make microbends on fibers 10 , the approach in this work is that of tapping the fiber with a 244 nm Ar + laser. In this paper, the light coming out of the holes/taps excites the dye in the water and the emitted fluorescence light is coupled back into the fiber (in a similar manner).…”

A fiber optic smart sensor for studying the setting characteristics of various grades of cement

“…Microbends on the fiber arise as the variable pressure exerted on it distorts the fiber [16][17][18]. These bends are so small that the bend radii are of the order of the diameter of the fiber.…”