Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches

Abstract

The miniaturization of electronics has been an important topic of study for several decades. The established roadmaps following Moore's Law have encountered bottlenecks in recent years, as planar processing techniques are already close to their physical limits. To bypass some of the intrinsic challenges of planar technologies, more and more efforts have been devoted to the development of 3D electronics, through either direct 3D fabrication or indirect 3D assembly. Recent research efforts into direct 3D fabrication have focused on the development of 3D transistor technologies and 3D heterogeneous integration schemes, but these technologies are typically constrained by the accessible range of sophisticated 3D geometries and the complexity of the fabrication processes. As an alternative route, 3D assembly methods make full use of mature planar technologies to form predefined 2D precursor structures in the desired materials and sizes, which are then transformed into targeted 3D mesostructures by mechanical deformation. The latest progress in the area of micro/nanoscale 3D assembly, covering the various classes of methods through rolling, folding, curving, and buckling assembly, is discussed, focusing on the design concepts, principles, and applications of different methods, followed by an outlook on the remaining challenges and open opportunities.

Inorganic Stimuli‐Responsive Nanomembranes for Small‐Scale Actuators and Robots

“…In addition to the intrinsic strain-induced assembly, the external stress enables the transformation from 2D sheets to 3D mesostructures on the microscopic scale due to the flexibility of materials, similar to origami arts. [65] Attributed to the microscale, capillary forces become considerable compared with bulk forces, resulting in possibilities to tune structures by controlling the surface tension. The interaction between capillary and elastic forces generates the distinguished deflection of planar objects, which drives the folding assembly from submillimeter to micrometers.…”

High‐Resolution 3D Printing of Freeform, Transparent Displays in Ambient Air

“…Overcoming this limitation potentially could result in significant applications beyond improving the scalability in device integration technologies. [22,[26][27][28][29] Herein, we report a hybrid 3D printing system that combines DLP and electrohydrodynamic jet (e-jet) printing for the production of transparent and freeform 3D optoelectronic devices Direct 3D printing technologies to produce 3D optoelectronic architectures have been explored extensively over the last several years. [5][6][7][8][9] One of the alternative technologies that can overcome the limitations of photolithography is direct 3D printing, which has been explored extensively during the last several years for purely additive operations in which functional inks are deposited only where they are required for the 3D structures.…”

An Inverse Design Method of Buckling-Guided Assembly for Ribbon-Type 3D Structures

“…Because of the compatibility with the well-established planar fabrication technologies, this approach can achieve high-speed, parallel assembly of 3D mesostructures with a broad range of thin-film materials and feature sizes, thereby paving the way to the development of novel micro-devices [7,[33][34][35][36]. Recent progress showed that strategic designs of 2D precursor structures [28,29,37] and deformable substrates [38][39][40] as well as the integration schemes [41][42][43][44] can substantially enrich the accessible range of 3D topologies. For example, the structured elastomer substrates with kirigami designs can introduce local rotational motions of the bonding sites to enable the formation of structures with chiral features and morphable shapes [39].…”