Berdasarkan hasil survei lokasi, drivetest awal, dan pengamatan data OSS (Operating Support System) yang dilakukan pada wilayah Taman Kopo Indah 2, disimpulkan bahwa trafik pengguna layanan 4G LTE (Long Term Evolution) untuk operator Tri di wilayah tersebut cukuplah tinggi, dan mengakibatkan menurunnya kualitas layanan dengan ditandai rendahnya kecepatan akses data. Salah satu solusi yang umum dilakukan untuk mengatasi masalah kapasitas jaringan seluler sekaligus memperbaiki coverage dan quality adalah dengan menggunakan metoda cell splitting. Pada penelitian ini telah dilakukan perencanaan cell splitting pada frekuensi 1800 Mhz guna meningkatkan kapasitas jaringan dan sekaligus memperbaiki coverage area pada wilayah Taman Kopo Indah 2. Perencanaan ini menggunakan software atoll 3.3 dengan menganalisa beberapa parameter yaitu RSRP (Reference Signal Received Power), SINR (Signal to Interference plus Noise Ratio) dan throughput. Hasil perencanaan bisa dikatakan memiliki kinerja maksimal dalam memperbaiki coverage area dan kapasitas dengan menghasilkan nilai parameter LTE, seperti RSRP ≥ -90 dBm mencapai 73,1%, SINR ≥ 5 dB telah mencapai 88,48%, dan throughput ≥ 800 Kbps mencapai 100%, hasil -hasil perencanaan ini telah sesuai dengan standar KPI (Key Performance Indicator) dari operator Tri, sehingga perencanaan ini bisa menjadi rekomendasi bagi pihak operator dalam upaya meningkatkan kualitas layanan terutama layanan 4G pada wilayah taman kopo indah 2 Bandung.
Kata kunci: Cell Splitting, 4G LTE, kapasitas jaringan
AbstractBased on the results of the location survey, initial drivetest, and OSS (Operating Support System) data observations carried out in the Taman Kopo Indah 2 area, it was concluded that the traffic of 4G LTE (Long Term Evolution) service users for Tri operators in the area was quite high, resulted in decreased services quality characterized by low data rate. One of the common solutions to overcome the problem of cellular network capacity while improving coverage and quality issues are to use the cell splitting method. In this study, a cell splitting planning at a frequency of 1800 MHz was carried out in order to increase network capacity and at the same time improve the coverage area in the Taman Kopo Indah 2. This planning used atoll 3.3 software by analyzing several parameters, namely RSRP (Reference Signal Received Power), SINR (Signal to Interference plus Noise Ratio), and throughput. The results of the planning can be considered to have maximum performance in improving coverage area and capacity by producing LTE parameter values, such as RSRP ≥ -90 dBm reaching 73,1%, SINR ≥ 5 dB has reached 88,48%, and throughput ≥ 800 Kbps reaching 100%, the results of this planning are in accordance with the KPI (Key Performance Indicator) standards of the Tri operator, so this planning can be a recommendation for the operator in an effort to improve service quality, especially 4G services in the area of Taman Kopo Indah 2 Bandung.