Methods for Biofilm Analysis on Silicone Tubing of Dialysis Machines

Abstract

We describe an analytical protocol to study biofilms that develop inside silicone tubing of dialysis machines. This protocol has been set up with the help of a dynamic testing device reproducing dialysis conditions. The methodology includes direct microscopic observation, biofilm removal with an original mechanical biofilm scraper, quantitative analysis with culturable and total bacteria counting, and endotoxin level measurement using the LAL chromogenic kinetic assay. The analytical protocol has been assessed on 13 different clinical tubing samples. Most samples were contaminated by adherent cells and the thickest biofilms were found at the connection between the dialysis water distribution loop and the dialysis machine. The less contaminated samples had been removed from dialysis machines that were decontaminated with citric acid and autoclaving, showing the importance of the decontamination procedure for the prevention of biofilm development. This article shows that easy, rapid, reproducible, and economical methods are applicable for a routine analysis of biofilms that develop on dialysis systems and should be included in the regular control of the microbiological quality of dialysis liquids.

Using an efficient biofilm detaching agent: an essential step for the improvement of endoscope reprocessing protocols

“…11 Direct staining Translucent pieces of tubing were stained with a 0.25% crystal violet solution (Labo-Moderne, Paris, France) for 5 min, cut lengthwise and observed with an optical microscope (Leica DMLB, Solms, Germany) connected to a couple charged device camera (Sony, Clichy, France). Six pictures were taken per piece of tubing and surface coverage was determined using Scion Image software.…”

A New Procedure Allowing the Complete Removal and Prevention of Hemodialysis Biofilms

“…The methods used for biofi lm analysis were those described by MarionFerey et al [16] and are summarized below.…”

Application of Fluorescence Spectroscopy for Microbial Detection to Enhance Clinical Investigations

“…Ideally, such an assessment would be undertaken externally (i.e. through the tubing) [35,36] in real time, without having to shut down or interrupt the system for testing and maintenance. A useful approach for determining the presence of bacterial biofilms in tubing made of PVC and similar transparent polymers may be light-induced fluorescence, applied externally (i.e.…”