Metallic Nanoislands on Graphene for Biomechanical Sensing

Abstract

This minireview describes a nanomaterial-based multimodal sensor for performing biomechanical measurements. The sensor consists of ultrathin metallic films on single-layer graphene. This composite material exhibits physical properties that neither material possesses alone. For example, the metal, deposited by evaporation at low (≤10 nm) nominal thicknesses, renders the film highly sensitive to mechanical stimuli, which can be detected using electrical (i.e., resistance) and optical (i.e., plasmonic) modalities. The electrical modality, in particular, is capable of resolving deformations as small as 0.0001% engineering strain, or 1 ppm. The electrical and optical responses of the composite films can be tailored by controlling the morphology of the metallic film. This morphology (granular or island-like when deposited onto the graphene) can be tuned using the conditions of deposition, the identity of the substrate beneath the graphene, or even the replacement of the graphene for hexagonal boron nitride (hBN). This material responds to forces produced by a range of physiological structures, from the contractions of heart muscle cells, to the beating of the heart through the skin, to stretching of the skin due to the expansion of the lungs and movement of limbs. Here, we provide an update on recent applications of this material in fields ranging from cardiovascular medicine (by measuring the contractions of 2D monolayers of cardiomyocytes), regenerative medicine (optical measurements of the forces produced by myoblasts), speech pathology and physical therapy (measuring swallowing function in head and neck cancer survivors), lab-on-a-chip devices (using deformation of sidewalls of microfluidic channels to detect transiting objects), and sleep medicine (measuring pulse and respiration with a wearable, unobtrusive device). We also discuss the mechanisms by which these films detect strain.

Optics-Free, In Situ Swelling Monitoring of Articular Cartilage with Graphene Strain Sensors

“…By transducing swelling into simple DC resistance measurements, we can rapidly assess the swelling mechanics of multiple tissue explants in parallel (Figure c). Strain sensors are made from evaporating palladium nanoislands on a single layer of graphene and can measure strains as low as 0.001%, making them ideal for biomechanical sensing applications. − This high sensitivity at low strains is made possible by swelling strain-induced scattering between the discrete metallic nanoislands patterned on the strain sensors , (Figure d).…”

Wide-field nanoscale imaging via near-field speckle illumination by nanoisland substrates

“…Unlike traditional fabrication methods such as electron beam lithography or focused ion beam, nanoisland structures can be mass-produced through a simple process of thin film deposition and temperature annealing. This versatility has led to their widespread use in various applications such as enhanced surface plasmon resonance (SPR) detection [1][2][3][4][5][6][7][8][9][10], localization microscopy [11,12], biological sensing [13][14][15][16][17], Raman signal enhancement [18][19][20][21][22][23][24], resonance energy transfer [25,26], and fluorescence and photoluminescence switching [27][28][29][30][31].…”

Disordered Nanocomposite Islands for Nanospeckle Illumination Microscopy in Wide‐Field Super‐Resolution Imaging

“…The core processes rapidly fabricate nanoisland substrates in mass‐production. For this reason, the nanoisland substrates have been explored widely, e.g., for applications in biological sensing, [ 18–21 ] Raman signal enhancement, [ 22–28 ] spontaneous light emission, [ 29 ] resonant energy transfer, [ 30,31 ] solar cells, [ 32,33 ] fluorescence and photoluminescence switching, [ 34–38 ] localization microscopy, [ 39,40 ] light‐emitting diodes, [ 41 ] and broadband photodetectors. [ 42 ] Nanoisland substrates were also used for enhanced surface plasmon resonance (SPR) detection [ 43–53 ] and to investigate its theoretical sensitivity limit.…”