Metal precursor impregnation sequence effect on the structure and performance of Ni Co/MgO catalyst

Jing, Jieying; Yang, Zhi-fen; Huo, Junmei; Bai, Hongcun; Li, Wenying

doi:10.1016/j.ijhydene.2019.02.079

Cited by 13 publications

(3 citation statements)

References 47 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Jinshuang et al 23) described that Pd/Al 2 O 3 -TiO 2 catalyst showed higher catalytic activity than Pd/TiO 2 in ethanol oxidation. Besides, Jing et al 24) found that the metal precursors affect the structure and catalyst performance. The catalyst prepared by first Co precursor impregnation (Ni/Co/MgO) resulted in the stronger catalytic activity and stability than those by the coimpregnation (NiCo/MgO) in steam reforming reaction.…”

mentioning

confidence: 99%

Pd Modification and Supporting Effects on Catalytic Dehydration of Ethanol to Ethylene and Diethyl Ether over W/TiO<sub>2</sub> Catalysts

Tresatayawed

Glinrun²,

Autthanit

et al. 2020

J. Oleo Sci.

View full text Add to dashboard Cite

IntroductionNowadays, the renewable energy resource such as solar, wind and biomass has become the most important energy sources due to its environmentally friendly, energy efficiency and reduction of harmful waste. Among energy resource, biomass has been recognized as one of the most utilization resources to provide the platform of chemical in various industries 1−3) . Besides, it has been interesting for many researches due to environmental concern about the emission of greenhouse gas from burning of fossil fuel (coal, oil and gas) and reducing of non-renewable feedstock supply in future. Recently, many researchers have played

show abstract

mentioning

confidence: 99%

Pd Modification and Supporting Effects on Catalytic Dehydration of Ethanol to Ethylene and Diethyl Ether over W/TiO<sub>2</sub> Catalysts

Tresatayawed

Glinrun²,

Autthanit

et al. 2020

J. Oleo Sci.

View full text Add to dashboard Cite

show abstract

“…Armenta et al [39] reported that the bimetallic (CuO-PdO/γ-χ-l2O3) performed higher catalyst activity when compared to monometallic catalysts (CuO/γ-χ-Al2O3 and PdO/γ-χ-Al2O3) in methanol dehydration to dimethyl ether. To improve the structure and catalyst performance of catalysts, the metal impregnation technique on support catalyst is promising to be an attractive on catalyst development [40].…”

Section: List Of Tablesmentioning

confidence: 99%

“…et al(2013) [58] examined that Pd/Al2O3-TiO2 catalyst showed higher catalytic activity than Pd/TiO2 in ethanol oxidation Jing et al (2019) [40]. discovered that the metal impregnation technique affect the structure and catalyst performance.…”

mentioning

confidence: 99%

Ethanol dehydration over WO3/TiO2 catalysts using titania derived from sol-gel and solvothermal methods with palladium modification

Tresatayawed

View full text Add to dashboard Cite

In this research, the characteristics and catalytic activity of WO3/TiO2 prepared by sol-gel and solvothermal and their metal modified were�investigated. The research was divided into two parts. In the first part, the catalyst performance of WO3/TiO2 catalysts using titania derived from sol-gel and solvothermal methods over ethanol dehydration reaction was examined. The results showed that the different preparation methods essentially altered the physicochemical properties of TiO2 supports. It revealed that the titania derived from solvothermal method denoted as TiO2-SV exhibited higher surface area and pore volume, and larger amounts acid sites than the one obtained from sol-gel method (TiO2-SG). As a result, the different characteristics of support catalyst seemingly influenced the catalytic properties of WO3/TiO2 catalysts.� It showed that the highest ethanol conversion (ca. 88%) at 400oC was achieved by the WO3/TiO2-SV catalysts due to its high acidity. Furthermore, WO3/TiO2-SV catalyst is promising to convert ethanol into ethylene and diethyl ether, having the highest ethylene yield of ca. 77% at 400?C and highest diethyl ether yield of ca. 26% at 250?C. These can be attributed to proper pore structure, acidity and distribution of tungsten. In the second part, the Pd modification and supporting effect of WO3/TiO2 catalysts on catalytic ethanol dehydration to ethylene and diethyl ether were investigated. The catalyst characterization and activity examination results indicated that the different sequence during impregnation influenced the physicochemical properties and catalyst activity.� The Pd incorporated into catalysts enhanced the ethanol conversion depending on the sequence of impregnation. The diethyl ether is the main product at low temperature, whereas ethylene is the main product at high temperature. At low temperature (ca. 200 to 300oC), the Pd incorporated over W/TiO2 catalyst resulted in an increasing of diethyl ether yield. It is worth noting that the ethanol conversion increased by palladium modification, while diethyl ether selectivity did not change. This can be attributed to the higher amount of weak acids sites present after Pd modification into catalyst. Among the catalysts, the PdW/TiO2 catalyst (co-impregnation) accomplished the highest diethyl ether yield of 41.4% at 300oC. At high temperature (ca. 350 to 400oC), the W/Pd/TiO2 catalyst (with sequential impregnation of Pd on TiO2 followed by W) achieved the highest ethylene yield of 68.1% at 400oC. Thus, the modification of Pd onto W/TiO2 upon different sequence of Pd and W impregnation improved diethyl ether and ethylene yield in catalytic ethanol dehydration.

show abstract

Influence Impregnation Method in the Structure of Bimetallic Ni-Zn/ZrO2 Catalyst

‘Adany¹,

Sembiring²,

Amirullah³

et al. 2023

Springer Proceedings in Physics

View full text Add to dashboard Cite

Metal precursor impregnation sequence effect on the structure and performance of Ni Co/MgO catalyst

Cited by 13 publications

References 47 publications

Pd Modification and Supporting Effects on Catalytic Dehydration of Ethanol to Ethylene and Diethyl Ether over W/TiO<sub>2</sub> Catalysts

Pd Modification and Supporting Effects on Catalytic Dehydration of Ethanol to Ethylene and Diethyl Ether over W/TiO<sub>2</sub> Catalysts

Ethanol dehydration over WO3/TiO2 catalysts using titania derived from sol-gel and solvothermal methods with palladium modification

Influence Impregnation Method in the Structure of Bimetallic Ni-Zn/ZrO2 Catalyst

Contact Info

Product

Resources

About