MEMS-based satellite micropropulsion via catalyzed hydrogen peroxide decomposition

Abstract

Microelectromechanical systems (MEMS) techniques offer great potential in satisfying the mission requirements for the next generation of miniaturized spacecraft being designed by NASA and Department of Defense agencies. More commonly referred to as 'nanosats', these spacecraft feature masses in the range of 10-100 kg and therefore have unique propulsion requirements. The propulsion systems must be capable of providing extremely low levels of thrust and impulse while also satisfying stringent demands on size, mass, power consumption and cost. We begin with an overview of micropropulsion requirements and some current MEMS-based strategies being developed to meet these needs. The remainder of the paper focuses on the progress being made at NASA Goddard Space Flight Center toward the development of a prototype monopropellant MEMS thruster which uses the catalyzed chemical decomposition of high-concentration hydrogen peroxide as a propulsion mechanism. The products of decomposition are delivered to a microscale converging/diverging supersonic nozzle, which produces the thrust vector; the targeted thrust level is approximately 500 µN with a specific impulse of 140-180 s. Macroscale hydrogen peroxide thrusters have been used for satellite propulsion for decades; however, the implementation of traditional thruster designs on the MEMS scale has uncovered new challenges in fabrication, materials compatibility, and combustion and hydrodynamic modeling. A summary of the achievements of the project to date is given, as is a discussion of remaining challenges and future prospects.

A Comprehensive Cold Gas Performance Study of the Pocket Rocket Radiofrequency Electrothermal Microthruster

“…The first is gas and chemical propulsion, which ranges from the traditional or microelectromechanical systems-based (MEMS) cold gas thrusters [3], to warm gas and chemical propellant systems. The second is electric propulsion, which can be grouped into three distinct categories: electrothermal, electrostatic, and electromagnetic.…”

Numerical Modelling of Anisotropic Heat Recirculation in Microcombustors

“…MEMS microthusters have been identified as a possible solution due to their low complexity and low "dead" volume (e.g. volume with no functional purpose) [16] whilst retaining the capability of producing higher specific impulses than CGT.…”

Study of the effects of preheated wall/plates in microthruster systems

“…4 with heater plates). The overall geometry (but not the exact dimensions), the structure and idea of heating the fluid flow in type 3 is adapted from Kundu et al (2013), Hitt et al (2001) but not exactly with the same components. They fabricated and tested such a microthruster.…”