Mechanical response of reduced graphene oxide (rGO) reinforced epoxy adhesive joints

Abstract

The present work aims at investigating the effect of adhesive modification on the lap shear strength of the adhesively bonded joints. The epoxy-based adhesive is reinforced with reduced graphene oxide (rGO) at different weight fractions. Single lap joints (SLJ) have been prepared by considering the commercially available aerospace-grade aluminum alloy AA8011 as the adherend material and Araldite 2014 A/B as the adhesive. Experiments showed that the addition of 0.5 wt.% graphene to the epoxy adhesive resulted an approximately 27% increase in the lap shear strength of the SLJ. Further increase in the reinforcement loading decreases the lap shear strength due to the agglomeration of graphene particles. A detailed analysis of the effect of reinforcement loading and overlap length on the shear strength has been presented and failure mechanisms are discussed.