Mechanical properties and microstructure characterization of zirconia nanoparticles glass composites for SOFC sealant

Hardness and modulus of elasticity of atomic layer deposited Al2O3-ZrO2 nanolaminates and mixtures

“…Zirconia is an important material in technology. It has found use in glasses, medical, dental, structural and refractory ceramics, sensors, solid oxide fuel cells, machinery parts and corrosion protection [1][2][3][4][5][6][7][8][9].…”

Application of BaO–CaO–Al2O3–B2O3–SiO2 glass–ceramic seals in large size planar IT-SOFC

“…The sealing and operating temperature of cell is 850 1C and 750 1C, respectively. Finally, the viscosity of the glass at two temperatures can be obtained from Fig.4 and the value is 10 6 -10 9 dPa s, which follows the requirements of sealing application [16]. Fig.5 shows the SEM images of BCAS glass heat treated for different times.…”

Effect of interconnect pre‐oxidation on high‐temperature wettability and mechanical properties of glass seals in SOFC

“…7,8 Ideal seals must meet multiple criteria, including but not limited to low leakage rates, high electrical insulation, excellent chemical compatibility over a wide A survey of the published literature modeling of CMCs has been studied by a n ers. Processes that have been modeled CVD, 17,18 CVI, [19][20][21][22] and Sol-Gel Infiltrat of alumina matrix in eight-harness satin has been studied numerically in Ref. [ proaches used in the above work general ing the flow of a high viscosity resin thr and modeling the chemical reactions and during processing.…”