Mechanical and electromagnetic response of carbon fiber reinforced epoxy polymer composites at different orientations

Abstract

T‐300 6K carbon fabric fiber‐reinforced epoxy laminated composites are prepared by in‐situ and hot‐compression molding technique. The main emphasis of this study is to examine the impact of the structural deformations on fiber orientations of laminated composites during vibrational damping, stiffness, and electromagnetic interference (EMI) shielding properties. The damping properties of carbon fiber laminated composites are analyzed in terms of natural frequency and logarithmic decrement. The digital image correlation technique has been used to measure the mode shape behavior of carbon fiber reinforced polymer (CFRP) composites. The dynamic behavior of the CFRP laminated composites has significant effect on the fiber orientations in terms of storage, loss modulus, and damping ratio. The value of EMI shielding of CFRP laminated composites of T‐300 6K based CFRP polymer laminated composites has slight variations in the SET and their values are 107.17 (B‐45), 106.33 (B‐30), and 110.0 dB (B‐0). The vibrational and EMI shielding properties are showing a huge potential for these kinds of CFRP laminated composites in military and aircraft applications.Highlights CFRP laminated epoxy composites were fabricated by hand layup technique. The ply orientation of CFRP composites were affected the mechanical properties. DIC was used to determine the mode shapes of laminated composites. CFRP laminated composite exhibited excellent EMI properties.

Effect of carbon nanotubes on thermoset curing and mechanical properties of carbon fiber reinforced epoxy resin laminates fabricated by self‐resistance electric heating

“…In recent years, the use of carbon fiber reinforced polymer (CFRP) in the fields of aerospace, automobile, and wind power achieved rapid growth due to advantages such as high specific strength and modulus, corrosion resistance, and anti‐fatigue 1–4 . Currently, external thermal heating methods dominate the curing process of the CFRP composite, including autoclave, 5,6 hot molding, 7,8 and oven 9,10 . Although external thermal heating methods have developed maturely to fabricate high‐performance CFRP components, they are unavoidable to rely on the heat conduction of the mold and forced‐convection heat transfer to cure the CFRP composites, resulting in a long curing cycle and high energy consumption for guaranteeing the temperature uniformity along the thickness of CFRP component 11–13 …”

Experimental Investigation of Influence of Fibre Orientation on the Dynamic Properties of Carbon Fibre and Intra-Ply Woven Carbon-Kevlar/Epoxy Hybrid Composite

“…The impact hammer tests have been previously compared with forced vibration tests by employing an electrodynamic shaker and the results were similar. The response from these tests is assessed in terms of receptance or accelerance plots, which subsequently depends on the sensors employed to measure the response [13][14][15][16][17][18][19][20][21][22].…”