Mechanical and Chemical Behaviour of Water Treatment Sludge and Soft Soil Mixtures for Liner Production

Abstract

Background: Clay-basedand geosynthetic liners are generally used as hydraulic barrier in solid waste disposal facilities, mining tailing ponds, and soil-based wastewater treatment technologies, avoiding leaching of hazardous compounds to subsoil and groundwater. Water treatment sludge (WTS) is a water treatment plant (WTP) residue which due to hydraulic properties seems to decrease the permeability in WTS:soil mixtures and may become an alternative material to produce sustainable waste-based liners. Objectives: This research aims to characterize and analyse physical, chemical and mechanical parameters of a WTS, a soft soil and four mixtures WTS: soil following 05:95%, 10:90%, 15:85%, 20:80% ratios. Therefore, evaluate the best ratio for producing waste-based liners for civil engineering applications. Methods: The geotechnical characterization performing –particle size distribution, specific surface, specific gravity, Atterberg limits, and Normal Proctor compaction; chemical composition due to oxides analyses through X-ray fluorescence (XRF), mineralogical description by X-ray diffraction (XRD) and scanning electron microscope (SEM) with energy dispersive spectrometer (EDS) coupled for imaging; and mechanical behavior performing - –oedometric consolidation, consolidated undrained (CU) triaxial, and falling head permeability. Tests were conducted for all mixtures, the soil, and WTS, with pointed out exceptions. Results and discussion: The results showed that the fine-grained WTS filled the soil voids but rearranging soil particles, thus, compacted dry unit weight decreased with WTS addition, probably due to its chemical composition with high amounts of aluminium and silica. The compressibility of the compacted mixtures did not differ significantly compared to the soil, while the shear strength analysis demonstrated a reduction in cohesion, and an increase in the effective internal friction angle proportional to WTS addition. Hydraulic conductivity increased with WTS until 10% of residue introduction, decreased for 15%, and continued to decrease for 20%, reaching optimum permeability in 15%. Conclusion: The incorporation of WTS can improve or just do not interfere at soil’s properties to be used as liner material in solid wastes storage facilities, mining ponds and soil-based wastewater treatment technologies. Furthermore, 15% of WTS (15:85% mixture) incorporation provided the best results meeting the hydraulic conductivity requirement for liner materials, i.e., equal, or lower than 10-9 m/s. The reuse of WTS for this purpose would allow producing a new added-value material in the scope of circular economy.

Beneficial Use of Water Treatment Sludge with Stabilizers for Application in Road Pavements

“…However, liquid and plasticity limits could not be ascertained for WTS. Hence, the plasticity index is deemed non-plastic, consistent with observations in the study by Marchiori et al [37].…”

Geotechnical evaluation of residual granitic soils contaminated with gasoline

“…[26], [27] [28]. The geological processes come from the weathering of granites and tectonism that operate in Portugal, where such characteristics provide a mostly sandy material and can be selected as materials suitable for earthworks.…”

O guia PMBOOK adaptado a um projeto implantado numa indústria gráfica: Estudo de caso

“…Isso inclui também o estudo de sua iteração e reatividade com outros compostos do solo e dos resíduos que possa causar impactos sobre a estrutura geral do solo. Esses estudos são críticos para a compreensão da estrutura do solo e para o desenvolvimento de práticas de engenharia geotécnica(MARCHIORI et al, 2020;2022b;2022c). quando se considera suas amplas e variadas possibilidades de origem.…”