Measurement of Thermodynamic Properties of Al–Sb System by Calorimeters

Relationship of thermodynamic properties between solid and liquid states in AIII-BVsystems

“…However, for liquid phase the information is lack [13][14][15][16][17][18][19][20]. In our work the modeling was executed in atmosphere of argon at the common pressure of P = 10 5 Pa and temperature and concentration intervals, corresponding to regions of liquid state on phase diagrams of binary GaSb, In-Sb, Al-Sb systems [11,12]: Ga-Sb, In-Sb systems: Т = 1000 -1600 К, 0 х Ga(In) 1, Al-Sb system: T = 1300 -1700 К, 0 х Al 1, where х Ga, х In and х Al is initial content of gallium, indium and aluminum in the melt (mole fraction), respectively.…”

Experimental Investigation of the Zn-Al-Sb System at 450 °C

“…[33][34][35] The system is a simple phase diagram with two eutectic points and just one intermediate compound, AlSb, with the cubic ZnS structure [36] (Table 1) and with a congruent melting point at 1058°C. [31] There is no evidence in the literature for mutual solid solubility between Al and Sb.…”

Thermal and mechanical properties of La–Al–Sb alloys

“…Much work has been done to investigate thermodynamic properties and phase diagram of the AlSb system. Zhang et al investigates the effect of rapid solidification for microstructure of the AlSb phase and they found that the rapid solidification has an important effect on the morphology, size and distribution of the primary AlSb phase [17][18][19].…”