Measurement of particle concentration in horizontal, multiphase pipe flow using acoustic methods: Limiting concentration and the effect of attenuation

Abstract

Measurement of particle concentration in horizontal, multiphase pipe flow using acoustic methods: limiting concentration and the effect of attenuation AbstractAn acoustic dual-frequency concentration inversion method, in which the backscattered acoustic signal received by transducers operating in the megahertz range is used to determine the concentration profile in suspensions of solid particles in a carrier fluid and which was originally developed for environmental applications, is applied to arbitrary suspensions of general engineering interest. Two spherical glass and two non-spherical plastic particle types with a range of size distributions and densities are used. Particle concentration profiles in horizontal turbulent pipe flow at Reynolds numbers of 25 000 and 50 000 -below and above the critical deposition velocity, respectively -and nominal concentrations of 0.5, 1 and 3 % by volume are presented for the four particle species, using measured backscattering and attenuation coefficients. In particular, the effects of particle size, density and flow rate on the transport and settling behaviour of suspensions are elucidated. The results demonstrate the potential of this method for measuring the degree of segregation in real suspensions and slurries across a range of challenging application areas, such as the nuclear and minerals processing industries. The limitations of the method are explored in detail through an analysis of the acoustic penetration depth and the application-specific maximum measurable concentration, both of which can be used to determine the most appropriate acoustic frequencies and measurement Highlights Marine model for measuring suspended solid fraction adapted for general use. Glass and plastic particles tested at several fractions in horizontal pipe flow.  Clear differences observed between species and settling and non-settling flows. Limiting concentration and penetration depth derived to inform future experiments. Method has potential for use in several engineering applications.

Measurement and density normalisation of acoustic attenuation and backscattering constants of arbitrary suspensions within the Rayleigh scattering regime

“…Hence, they have direct implications on application capability of the ABS with respect to the types of suspensions that are measurable, and the possible penetration depths [47].…”

Sand Transport and Deposition Behaviour in Subsea Pipelines for Flow Assurance

“…The volume fraction of the solid phase (0.01-0.1%) was experimentally measured in a horizontal pipeline at a very low concentration. Rice et al [16] utilized two kinds of particles including the glass and plastic solids to understand the sand transport behaviour in the multiphase flow pipeline.…”

Ultrasonic particle volume fraction profiling: an evaluation of empirical approaches

“…The theoretical models often have limitations, especially in terms of maximum volume fractions that can be accurately accommodated (Hunter et al 2012a). This has led to the development of more generalized approaches over the past decade and can be broadly categorized into: semi-empirical (Hunter et al 2012b;Rice et al 2014;Bux et al 2015;Rice et al 2015) and empirical (Furlan et al 2012;Saint-Michel et al 2017).…”