Measurement of Directional Wave Spectra Using Aircraft Laser Altimeters

Abstract

A remote sensing method to measure directional oceanic surface waves by three laser altimeters on the NOAA LongEZ aircraft is investigated. To examine feasibility and sensitivity of the wavelet analysis method to various waves, aircraft motions, and aircraft flight directions relative to wave propagation directions, idealized surface waves are simulated from various idealized aircraft flights. In addition, the wavelet analysis method is also applied to two cases from field measurements, and the results are compared with traditional wave spectra from buoys. Since the wavelet analysis method relies on the "wave slopes" measured through phase differences between the time series of the laser distances between the aircraft and sea surface at spatially separated locations, the resolved directional wavenumber and wave propagation direction are not affected by aircraft motions if the resolved frequencies of the aircraft motion and the wave are not the same. However, the encounter wave frequency, which is directly resolved using the laser measurement from the moving aircraft, is affected by the Doppler shift due to aircraft motion relative to wave propagations. The wavelet analysis method could fail if the aircraft flies in the direction such that the aircraft speed along the wave propagation direction is the same as the wave phase speed (i.e., the aircraft flies along wave crests or troughs) or if two waves with different wavelengths and phase speed have the same encountered wavelength from the aircraft. In addition, the data noise due to laser measurement uncertainty or natural isotropic surface elevation perturbations can also affect the relative phase difference between the laser distance measurements, which in turn affects the accuracy of the resolved wavenumber and wave propagation direction. The smallest waves measured by the lasers depend on laser sampling rate and horizontal distances between the lasers (for the LongEZ this is 2 m). The resolved wave direction and wavenumber at the peak wave from the two field experiments compared well with on-site buoy observations. Overall, the study demonstrates that three spatially separated laser altimeters on moving platforms can be utilized to resolve two-dimensional wave spectra.

Demonstration of Two Portable Scanning LiDAR Systems Flown at Low-Altitude for Investigating Coastal Sea Surface Topography

“…Figure 5 shows the locations of three contiguous segments of processed Q240 data blocks, and two contiguous segments of processed Q560 data blocks, located in the surf zone adjacent to the mouth of the Murray River. Because of the dihedral angle of the wings, there is not complete overlap of the Q240 and Q560 footprints, as seen in Figure 5 (segments [3][4][5]. In this Section, we show a comparison of sea surface topography and wave profiles obtained from Q240 and Q560 data.…”

Excitation of planetary electromagnetic waves in the inhomogeneous ionosphere

“…To be able to detect PEMW packets in this background, it seems possible to use sophisticated data analysis techniques that have worked well in the study of seismic and oceanic wave processes: directional spectra estimation (see e.g. Sun et al, 2005); study of a packet modification due to the coaction of nonlinearity, dispersion, and dissipation; using the concept of so called "coda waves" (see e.g. Sèbe et al, 2005).…”

Impact of high‐frequency waves on the ocean altimeter range bias

“…One limitation of the aircraft laser altimeter system is inability to cleanly resolve the long‐wave directional spectrum without a priori knowledge of wave propagation directions [ Sun et al , 2005]. This is mainly a limitation due to aircraft encounter speed with respect to the moving sea surface.…”