Measurement and Analysis of SSD Reliability Data Based on Accelerated Endurance Test

Abstract

In recent years, NAND Flash-based solid-state drives (SSDs) have become more widely used in data centers and consumer markets. Data centers generally choose to provide high-quality storage services by deploying a large number of SSDs, but there are no effective preventive measures to reduce the impact of SSD failures currently. Some existing studies have analyzed the relevant factors related to SSD failures from different angles, but the characteristics of reliability changes exhibited by SSD throughout the life cycle have not been explored in depth. On the other hand, although the 3D manufacturing process has increased the storage density of the SSD, the mutual influence between the flash units has also increased, resulting in severe degradation of the performance and lifetime of the SSD. Therefore, in order to fully understand the reliability varying process of SSD throughout the life cycle, we first designed an SSD lifetime endurance test method, then conducted the endurance test and collected the reliability data for the entire life cycle of the 3D TLC SSD in the laboratory environment with reference to the JEDEC standard. Through the analysis of experimental data and its statistical correlation, it is found that SSD will produce a large number of uncorrectable errors before reaching the endurance limit, and there will be a phenomenon of continuous high operating temperature, as well as showing some intrinsic relationships about SSD reliability data. The findings in this paper are valuable for identifying whether an SSD is going to fail.

Mitigating Self-Heating in Solid State Drives for Industrial Internet-of-Things Edge Gateways

“…In a storage context this feature is degraded by the temperature. There is a general consensus reported in many large-scale studies [7,8,18,19] that high temperatures may negatively affect the reliability of SSDs by aging the storage media integrated within. Therefore the JEDEC standard for SSDs testing [20] exploits this factor to accelerate failures for reliability assessments.…”

Reliability and Remaining Life Assessment of an Electronic Fuze Using Accelerated Life Testing

“…The development of the reliability block diagram and then identifying parallel and series systems contributing towards reliability can help in the overall system reliability estimation of the electronic module [21]. Wang et al [22] measured and analyzed solid-state drives (SSD) reliability using accelerated testing. They compared the results and retention of properties both at normal and high temperatures.…”