Mathematical model of wedge-shaped sliding support with low melting metal coated guide for partially filled working gap

Bar reinforced concrete structures, which include piles, in real working conditions perceive a whole range of internal force factors. Axial tension-compression forces, bending moments and shear forces are the most commonly perceived internal force factors. Of particular interest is the effect on the cross section of the shear force. If a complex curly shape is replaced by elementary form, then the calculation is not difficult. However, when calculating the composite cross section, there is no unambiguous solution. In accordance with the adopted regulatory documentation, it is necessary to accept only a main part, while discarding the surrounding areas. It is important to study the configuration of the shape of a complex section for the perception of a shear force. The purpose of the work was to refine the account of the entire complex section using numerical simulation by the finite element method, analytical calculations and small-scale experiments. Determination of further practical application of the obtained results on real structures was also the goal of the study. The parameters of the distribution of shear force between the main rib and flanges were obtained by numerical analysis and small-scale experiments. Numerical models of rectangular and tee cross sections beams have been developed. Analytical dependences were studied and full-scale tests of reinforced concrete beams of various sections were carried out. It has been established that when taking into account the work of the entire cross-section, the bearing capacity of concrete for the action of a shear force is 20% greater than when calculating only the main section without taking into account the shelves.

show abstract

Mathematical model of wedge-shaped sliding support with low melting metal coated guide for partially filled working gap

Cited by 3 publications

References 9 publications

Micropolar Lubricants in a Bearing with a Low-Melting Base Ring Coating and a Porous Slider Surface Coating

Micropolar Lubricants in a Bearing with a Low-Melting Base Ring Coating and a Porous Slider Surface Coating

Experimental and theoretical research of the stress-strain state of reinforced concrete bar structures under the influence of shearing force

Features of the Internal Force Factors Distribution in Reinforced Concrete Piles of Complex Cross Section under the Influence of a Transverse Load

Contact Info

Product

Resources

About