Materials Evaluation Test Series (METS) 04, 05, and 06

Abstract

The purpose of this work is to examine the environmental, safety, health and operational aspects of detonating a confined explosive test apparatus that has been designed to maximize the dynamics of impact on beryllium metal components for Contained Firing Facility (CFF) applications. A combination of experimental collection and evaluation methods were designed and implemented to provide an evaluation of immediately postdetonation by-products reflecting a potential worst-case scenario beryllium aerosolization explosive event. The collective Material Evaluation Test Series (METS) 04 -06 provided explosive devices designed to scale for the dedicated METS firing tank that would provide a post-detonation internal environment comparable to the CFF. The experimental results provided appropriate information to develop operational parameters to be considered for conducting full-scale beryllium-containing experimental tests with similar designs within CFF and B801A. These operational procedures include the inclusion of chelating agents in pre-shot CFF cardboard containers with a minimum of 600 gallons content, an extended time period post-test before purging the CFF chamber, and an adaptation of approaches toward applications of the scrubber and HEPA systems during the post-shot sequence for an integrated environmental, safety, and health approach. In addition, re-entry and film retrieval procedures will be adapted, in line with abatement techniques for cleaning the chamber, that will be required for work inside a CFF that will contain an elevated concentration of spherical and highly aerosolizable beryllium particulate.

Material Evaluation Test Series 07, 08A, and 09A

“…This firing tank was used to determine the METS testing for beryllium metal on the B850 firing table (Zalk 2002). This tank was transferred to the B812 firing table to enable this extended experimental process ( Figure 1).…”