Material Extrusion Additive Manufacturing of the Composite UAV Used for Search-and-Rescue Missions

Abstract

The additive processes used in the manufacture of components for unmanned aerial vehicles (UAVs), from composite filaments, have an important advantage compared to classical technologies. This study focused on three-dimensional design, preliminary aerodynamic analysis, fabrication and assembly of thermoplastic extruded composite components, flight testing and search-rescue performance of an UAV. The UAV model was designed to have the highest possible structural strength (the fuselage has a structure with stiffening frames and the wing is a tri-spar), but also taking into account the limitations of the thermoplastic extrusion process. From the preliminary aerodynamic analysis of the UAV model, it was found that the maximum lift coefficient of 1.2 and the maximum drag coefficient of 0.06 were obtained at the angle of attack of 12°. After conducting flight tests, it can be stated that the UAV model, with components manufactured by the thermoplastic extrusion process, presented high stability and maneuverability, a wide range of speeds and good aerodynamic characteristics. The lack of this type of aircraft, equipped with electric motors, a traffic management system, and a thermal module designed for search-and-rescue missions, within the additive manufacturing UAV market, validates the uniqueness of the innovation of the UAV model presented in the current paper.

Security Performance Analysis of Full-Duplex UAV Assisted Relay System Based on SWIPT Technology

“…In recent years, UAVs have been widely used in the military, agriculture, monitoring and prediction, transportation and logistics, and disaster rescue [1][2][3][4][5] because of their advantages, such as high mobility and low-cost networking. UAV signal transmission has line-of-sight link transmission and broadcasting characteristics, which will make the UAV communication system easier to eavesdrop on, therefore, how to guarantee the security of signal transmission has gradually become a hot issue in the study of UAV communication [6].…”

Inspection of microwave self‐healing efficiency in carbon nanotube reinforced polymer composites for aerospace applications

“…[2][3][4][5][6][7][8][9] The materials commonly encountered in UAV propellers include thermoplastics including acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polyamide (PA) and polycarbonate (PC), are commonly used due to their lightweightness, superior ductility, ease of processing and recyclability compared to thermosets. [10][11][12][13][14][15][16] Furthermore, carbon fiber exhibits greater stiffness and reduced weight compared to thermoplastics, hence potentially enhancing its efficiency. Nevertheless, it should be noted that carbon fiber propellers exhibit higher costs and more brittleness.…”

Interdisciplinary Studies of Jet Systems using Euler Methodology and Computational Fluid Dynamics Technologies

“…Wang & Wang [42] studied the processes of phase transitions in velocity flows in ejector channels. Song et al [43] and Zaharia et al [44] actively apply additive technologies in fluidics engineering. Yan et al [45] analyzed a two-stage ejector.…”