Mass transport analysis for tritium removal in FHRs

Recent developments in high-magnetic-field fusion systems have created large incentives to develop flibe (Li 2 BeF 4) salt fusion blankets that have four functions: (1) convert the high energy of fusion neutrons into heat for the power system, (2) convert lithium into tritium-the fusion fuel, (3) shield the magnets against radiation, and (4) cool the first wall that separates the plasma from the salt blanket. Flibe is the same coolant proposed for fluoride-salt-cooled high-temperature reactors that use clean flibe coolant and graphite-matrix coated-particle fuel. Flibe is also the coolant proposed for some molten salt reactors (MSRs) where the fuel is dissolved in the coolant. The multiple applications for flibe as a coolant create large incentives for cooperative fusion-fission programs for development of the underlying science, design tools, technology (pumps, instrumentation, salt purification, materials, tritium removal, etc.), and supply chains. Other high-temperature molten salts are being developed for alternative MSR systems and for advanced Gen-III concentrated solar power (CSP) systems. The overlapping characteristics of flibe salt with these other salt systems create significant incentives for cooperative fusion-fission-solar programs in multiple areas. We describe the fission and fusion flibe-cooled systems, what has created this synergism, what is different and the same between fission and fusion in terms of using flibe, and the common challenges. We review (1) the characteristics of flibe salts, (2) the status of the technology, (3) the options for tritium capture and control in the salt, heat exchangers, and secondary heat transfer loops, and (4) the coupling to power cycles with heat storage. The technology overlap between flibe systems and other high-temperature MSR and CSP salt systems is described. This defines where there are opportunities for cooperative programs across fission, fusion, and CSP salt programs.

show abstract

“…The most recent work 48,49 has been done at the University of Michigan for FHRs. Figure 11 shows a modular separation unit.…”

Section: Vd1d Permeation Membranesmentioning

confidence: 99%