As the largest offshore oilfield in China, Bohai Oilfield has made good exploration discoveries in various target strata in the past decade, especially in the exploration of deep buried hills. Because the shallow favorable targets have been nearly drilled out, the exploration focus of Bohai oilfield is gradually shifting to the middle and deep layers. The buried hill have become the most important research hots pot of Bohai oilfield, and several large gas reservoirs have been discovered in Archean strata. The main reservoir type of buried hill oilfield is fracture, which has complicated characteristics with low porosity, strong heterogeneity and complex fracture distribution. The average depth of buried hill is about 4500m, so it is difficult to accurately predict and describe good fractured reservoir in the exploration and development.
Because of the deep buried depth, the quality of seismic data is usually very poor. On the one hand, the effective signal of fractured reservoirs are very weak, and the low S/N seismic data is hard to recognize fractured reservoir. On the other hand, there are a lot of residual internal multiples, and their amplitude is even stronger than the reflected wave of fractures. Taking the normal processing procedure into consideration, most of the multiples like surface-related multiples have been well suppressed during the seismic data processing. In order to clearly identify the real reflection wave of fractured reservoir, it is necessary to suppress the internal multiples and enhance the effective signals.
Generally, the methods of suppressing multiple waves are divided into two categories: one is the filtering method based on signal analysis and processing, such as t -p transform and f-k transform; the other is the prediction subtraction method based on wave equation, such as wave extrapolation method and inverse scattering series method. The first kind of methods have certain limitations: the dynamic correction speed of multiple waves and primary waves is similar, which weakens the effectiveness of t -p transformation, multiple and primary waves have similar slopes, which weakens the effectiveness of f-k filtering. The second type of method mainly uses the generation mechanism of multiple waves to predict and suppress multiple waves. It comprehensively considers the kinematic and dynamic characteristics of multiple wave propagation and can adapt to complex underground structure. It uses its own data as a multiple wave prediction operator, requires less or no assumptions about underground structure, and attenuates multiple waves without damaging the primary reflected signal. For internal multiple waves, the current effective method is the inverse scattering series method based on the point scattering model. This method does not need a prior velocity structure model, and has a good adaptability to complex structures, but the calculation is very large.
