Marangoni Driven Boundary Layer Flow of Carbon Nanotubes Toward a Riga Plate

Shafiq, Anum; Zari, Islam; Khan, İlyas; Khan, Tahir; Seikh, Asiful H.; Sherif, El‐Sayed M.

doi:10.3389/fphy.2019.00215

Cited by 30 publications

(12 citation statements)

References 44 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…In the current article, the aim to investigate the model dependencies of the response variables which are skin friction coefficients and the local Nusselt number with the input parameters which are models’ parameters including suction parameter, Nanoparticle volume fraction, and Magnetic parameter. The use of RSM to determine the optimal parameter’s level is frequently observed in related studies 41 – 44 . Moreover, the experimental scheme like RSM is usually linked with sensitivity analysis to investigate the dependency of response on the input parameters 45 – 47 .…”

Section: Introductionmentioning

confidence: 99%

Application of response surface methodology on the nanofluid flow over a rotating disk with autocatalytic chemical reaction and entropy generation optimization

Mehmood

Ramzan

Howari

et al. 2021

Sci Rep

View full text Add to dashboard Cite

The role of nanofluids is of fundamental significance in the cooling process of small electronic devices including microchips and other associated gadgets in microfluidics. With such astounding applications of nanofluids in mind, it is intended to examine the flow of magnetohydrodynamic nanofluid comprising a novel combination of multi-walled carbon nanotubes and engine oil over a stretched rotating disk. The concentration equation is modified by considering the autocatalytic chemical reaction. The succor of the bvp4c numerical technique amalgamated with the response surface methodology is secured for the solution of a highly nonlinear system of equations. The sensitivity analysis is performed using a response surface methodology. The significant impacts of the prominent arising parameters versus involved fields are investigated through graphical illustrations. It is observed that the skin friction coefficient and local Nusselt number are positively sensitive to nanoparticle volume fraction while it is positively sensitive to the suction parameter. It is negatively sensitive to the Magnetic parameter. The skin friction coefficient is negatively sensitive to all input parameters.

show abstract

Section: Introductionmentioning

confidence: 99%

Application of response surface methodology on the nanofluid flow over a rotating disk with autocatalytic chemical reaction and entropy generation optimization

Mehmood

Ramzan

Howari

et al. 2021

Sci Rep

View full text Add to dashboard Cite

show abstract

“…This fact motivates the present study to deal with a radiating flow for the operational and fascinating Riga plate. Shafiq et al [32] imposed a homotopy analytical technique to explore the Marangoni BL flow with radiation of carbon nanotubes along a Riga plate. Krishnamurthy et al [33] worked out the chemical reaction effect of BL slip flow of radiating nanoparticle fluid along a stretching sheet of nonlinear type.…”

Section: Introductionmentioning

confidence: 99%

EMHD radiating fluid flow along a vertical Riga plate with suction in a rotating system

et al. 2021

View full text Add to dashboard Cite

This study is performed on the numerical investigation of electro-magnetohydrodynamic (EMHD) radiating fluid flow nature along an infinitely long vertical Riga plate with suction in a rotating system. The prevailing equations are generated from the Navier–Stokes’ and energy equations. A uniform suction velocity is introduced to control the flow. The prevailing boundary layer (BL) equations are the stuff to delineate the mechanical features of the flowing nature along with the electromagnetic device (Riga plate). Accordingly, the use of usual transformations on the equations transformed those into a coupled dimensionless system of non-linear partial differential equations (PDEs). After conversion, the elucidation of the set of equations is conducted numerically by an explicit finite difference method (FDM). The criteria for stable and converging solutions are constructed to find restrictions on various non-dimensional parameters. The retrieved restrictions are $$P_{r} \ge 0.19,\,$$ P r ≥ 0.19 , $$R_{d} \ge 0.1,\,\,$$ R d ≥ 0.1 , $$S \ge 1,$$ S ≥ 1 , $$E_{c} = 0.01\,\,$$ E c = 0.01 and $$0 < R \le 0.1$$ 0 < R ≤ 0.1 . Furthermore, sensitivity tests on mesh and time as well as comparison within the literature have been demonstrated in graphical and tabular form. Finally, the important findings of the non-dimensional parameters influences have been portrayed in graphical manner by using the MATLAB R2015a tool. A substantial uprise is noted for both the velocities (secondary and primary) under the rising actions of the modified Hartmann number, whereas the suction parameter suppresses both the velocities.

show abstract

“…In fluid materials, theoretical, experimental, or simulation studies that focus on nanoparticles have received considerable attention [7][8][9][10]. A nanofluid represents a new class of the fluid that contains nanoparticles (such as metallic nanoparticles or carbon nanotubes), and it has enormous applications in the industry [11][12][13][14]. The nanofluid exhibited enhanced thermo-physical properties (such as heat transfer, heat capacity, entropy, and viscosity) compared to the base fluid [15][16][17].…”

Section: Introductionmentioning

confidence: 99%

Effect of CaCO₃ nanoparticles on the microstructure and fracture toughness of ceramic nanocomposites

Hakamy

2020

Journal of Taibah University for Science

View full text Add to dashboard Cite

This study investigated the effect of using calcium carbonate (CaCO 3) nanoparticles on the microstructural properties, flexural strength and fracture toughness of ceramic nanomaterials. The flexural strength and fracture toughness were evaluated for CaCO 3 nanoparticle contents of 1%, 2%, and 3% by weight of cement powder. The microstructural analyses from X-ray diffraction showed that nano-CaCO 3 improved the microstructure of nanocomposites because it reduces the tricalcium silicate and dicalcium silicate peaks and increases the calcium silicate hydrate products. Moreover, the results showed that the nanocomposites with 1 wt% nano-CaCO 3 exhibited the maximum flexural strength and fracture toughness compared to the other composites owing to the filler and nucleation effect of nano-CaCO 3. In addition, nano-CaCO 3 could resist the unstable micro-crack propagation in cement nanocomposites by filling the micro-cracks and voids. Future applications in synthesis or steel fiber-reinforced concrete or ceramic nanocomposites could benefit from the use of the analyses presented in this study.

show abstract

Marangoni Driven Boundary Layer Flow of Carbon Nanotubes Toward a Riga Plate

Cited by 30 publications

References 44 publications

Application of response surface methodology on the nanofluid flow over a rotating disk with autocatalytic chemical reaction and entropy generation optimization

Application of response surface methodology on the nanofluid flow over a rotating disk with autocatalytic chemical reaction and entropy generation optimization

EMHD radiating fluid flow along a vertical Riga plate with suction in a rotating system

Effect of CaCO₃ nanoparticles on the microstructure and fracture toughness of ceramic nanocomposites

Contact Info

Product

Resources

About

Marangoni Driven Boundary Layer Flow of Carbon Nanotubes Toward a Riga Plate

Cited by 30 publications

References 44 publications

Application of response surface methodology on the nanofluid flow over a rotating disk with autocatalytic chemical reaction and entropy generation optimization

Application of response surface methodology on the nanofluid flow over a rotating disk with autocatalytic chemical reaction and entropy generation optimization

EMHD radiating fluid flow along a vertical Riga plate with suction in a rotating system

Effect of CaCO3 nanoparticles on the microstructure and fracture toughness of ceramic nanocomposites

Contact Info

Product

Resources

About

Effect of CaCO₃ nanoparticles on the microstructure and fracture toughness of ceramic nanocomposites