Maintenance Techniques for Cracks in Asphalt Layers

Abstract

Treating cracks in asphalt pavements is a major stage of each maintenance work for engineers. The goal of any crack cure is to limit the water intrusion into underlying pavement structure layers. Such water infiltrates in to base layers of the pavement and may cause damage to the pavement structure. The previous studies focused on crack repairing materials and methods but not the bonding at the interface joint. In this study, the influence of the repairing materials and depth on the bonding at the interface joint using two repairing materials. Slabs were cast to simulate surface of road. Unlikely, slabs contain cracks in the middle of slab with different depths (35 mm, 50 mm, 70 mm). Consequently, these cracks were repaired with two methods; firstly, repairing them with RC+Sand and secondly, with Sika flex®-1a. The slabs were tested after being repaired to know the best method and depth. It has been concluded that slabs having cracks that have been repaired with RC+Sand increase failure load compared with empty cracks and cracks that have been repaired with Sika flex®-1a. Also, cracks with small depth that have been repaired with Sika flex®-1a increase failure load compared with empty cracks.