Macroscopic and Mechanically Robust Hollow Carbon Spheres with Superior Oil Adsorption and Light‐to‐Heat Evaporation Properties

Abstract

1wileyonlinelibrary.com them technologically important in a wide range of potential applications. [11,12] This promise has motivated intense research efforts seeking to develop general routes for synthesizing HCSs.Currently, the major approaches for the production of HCSs rely on templating methods. For example, monodisperse silica [13][14][15] or polyester microspheres [16,17] can be used as sacrificial hard templates, because they are readily available in a wide range of sizes. However, the synthesis procedure is complicated, as these hard templates need to be synthesized beforehand and then a carbon precursor needs to be coated on the surface of the templates, after which the template still needs to be removed as well. Hydrothermal reduction, [18] emulsion processing, [19] and selfassembly approaches [20][21][22][23][24] have also been reported for synthesizing HCSs. However, all of these approaches have some kind of disadvantage, such as low yields, or a time-consuming or complex fabricating process, that greatly limit their practical applications. More challengingly, little success has been achieved in realizing particle engineering in HCSs especially at the millimeter-length scale and to develop a processing technology for large-quantity production, both of which are essential to bring many promising applications of HCSs to reality. To this end, uniform hollow spheres with high mechanical strength are desirable, but the fabrication of such HCSs remains very challenging to date.Herein, we demonstrate a general, template-free, phase-separation approach, in which the liquid-liquid, phase-inversion process and the gas-foaming process are coupled for the first time, for a fast and continuous processing of macroscopic and mechanically robust HCSs. The phase-inversion process is a standard technique for preparing porous polymeric membranes used in membrane-separation processes. [25] In this fast and simple process, a concentrated polymer solution is immersed in a non-solvent bath and a solvent-non-solvent exchange leads to phase separation. [26,27] Here, we modified the phase-inversion process by dropping a polymer solution droplet into a nonsolvent coagulation bath, which could exchange solvent and non-solvent across the interface, and thus lead to a rapid precipitation at the surface of the droplet. Coupled with gas foaming Macroscopic and Mechanically Robust Hollow Carbon Spheres with Superior Oil Adsorption and Light-to-Heat Evaporation PropertiesJianguo Zhou, Zhenlong Sun, Mingqi Chen, Jitong Wang, Wenming Qiao, Donghui Long,* and Licheng Ling Hollow carbon spheres (HCSs) represent a special class of functional materials, to which intense interest has been paid in the fields of materials science and chemistry. A major problem with these materials is the lack of sufficient particle engineering and mechanical strength for practical applications and the difficulty of up-scaling. Herein, we report a general, template-free, phaseseparation approach, in which the liquid-liquid phase-inversion process and a gas-...

An Ultrathin Flexible 2D Membrane Based on Single‐Walled Nanotube–MoS2 Hybrid Film for High‐Performance Solar Steam Generation

“…Typically, the water desalination technologies include reverse osmosis, capacitive deionization, membrane distillation, solar evaporation, etc. In recent years, solar evaporation as a type of desalination technology has attracted considerable research attention due to its capability to harvest renewable and inexhaustible solar energy . Currently, the researches on the solar evaporation mainly focusing on the localized heating system, which is realized by floating the photothermal materials on the evaporative surface to localize the solar energy .…”

Shape Conformal and Thermal Insulative Organic Solar Absorber Sponge for Photothermal Water Evaporation and Thermoelectric Power Generation

“…[8][9][10][11][12][13][14][15] Compared with the conventional solar-driven steam generation system which requires high optical devices and large footprints investment, the emerging interfacial photothermal water evaporation based on nanostructured solar receiver materials restrict the solar heat at the water-air interface to suppress the heat losses and enhance the conversion efficiency. To date, significant progress in preparation of solar absorber materials, including semiconductors, [16][17][18] metallic, [19][20][21] and carbonaceous nanomaterials, [22][23][24][25] alongside with prudent system designs, e.g., environmental enhancement, [26][27][28] optical, [28][29][30] and thermal management [31][32][33] The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10.1002/aenm.201900250.…”

Surfactant Assembly within Pickering Emulsion Droplets for Fabrication of Interior‐Structured Mesoporous Carbon Microspheres

“…[5] More desirable is those mesoporous carbon microspheres that possess ah ierarchical or multicompartmentalized interior structure because such astructure can significantly benefit mass transport-relevant processes [6] and enable spatio-temporal control of ac hemical process occurring in their interior. [7] However,f abrication of interior-structured mesoporous carbon microspheres (MCMs) is extremely challenging in comparison to carbon nanospheres because it is non-trivial to realize delicate control of their interior structure.A lthough spraying, [8] emulsion, [9] aerosol-assisted self-assembly [5a] and dripping [10] methods have been explored to prepare carbon materials,t hese approaches are usually limited to producing spherical particles of sizes ranging from submicrons to af ew microns. [8,9a] Moreover,the resultant carbon microspheres fail to possess complex interior structures because of the inability of these methods in diversifying the assembly at am icron scale.…”