Machine parameter independent control of a grid-connected variable speed doubly-fed induction generator for gas engine generation systems

Ataji, Ahmad Bashar; Miura, Yushi; Ise, Toshifumi; Tanaka, Hiroki

doi:10.1109/ecce-asia.2013.6579285

Cited by 4 publications

(1 citation statement)

References 8 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…In this paper, the stator voltage orientation is adopted where the d-axis is aligned with the stator voltage using a PLL (phase-locked loop) circuit similar to that in [30]. The equivalent circuit of the DFIG in this-frame is shown in Figure 2 [31] where the generator notation for the stator current is adopted. This paper provides a brief review of the conventional decoupled P-Q control; then, the proposed decoupled control is introduced, and the sensitivity analysis for inaccuracy in the slip angle is provided.…”

Section: Conventional Decoupled P-q Controlmentioning

confidence: 99%

A New Robust Decoupled Control of the Stator Active and Reactive Currents for Grid-Connected Doubly-Fed Induction Generators

et al. 2016

Self Cite

View full text Add to dashboard Cite

This paper addresses the grid-connected variable speed doubly-fed induction generator, and proposes a new decoupled control to replace the conventional decoupled active and reactive powers (P-Q) control. The proposed decoupled control is based on decoupling the stator active and reactive currents, in contrast with the conventional decoupled P-Q control, which is based on decoupling the stator active and reactive powers by forcing the stator d-or q-voltage to zero. The proposed decoupled control has all the advantages of the conventional decoupled P-Q control such as constant switching frequency and robustness against slip angle inaccuracy, and it has some additional advantages: The proposed control requires less machine parameters; for the controller design, it requires the stator-to-rotor turns ratio only; for the online calculation, it does not requires any machine parameter. The proposed decoupled control is more flexible and robust since the control is independent of the grid voltage orientation. It is robust against variation in the grid voltage amplitude. Several experiments are carried out using a 1.1 kW doubly-fed induction generator (DFIG), and the results support the proposed decoupled control and demonstrate some of its advantages.

show abstract

Section: Conventional Decoupled P-q Controlmentioning

confidence: 99%