&lt;title&gt;Compact airborne staring FPA sensor with microscanning&lt;/title&gt;

Sanders, John G.; Wan, William H.; Harris, Van; Newton, D.; Tylinski, George; Wolschon, Mark; Imamura, Joseph J.

doi:10.1117/12.241958

Cited by 2 publications

(1 citation statement)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…At standoff distances of approximately 325 m and in outdoor conditions, significant improvements in image reconstruction quality has been achieved, with a weighted-average approach providing sub-bin depth resolution. Future work in this area will aim at implementing the micro-scanning technique in various outdoor conditions such as through varying levels of atmospheric obscurant, evaluating increase in resolution versus number of images taken, and evaluating the modulation transfer function of the system to quantify spatial resolution increases, which has been demonstrated for other micro-scanning systems [26][27][28][29]. The development and implementation of advanced algorithms which would allow for continuous, video-rate imaging is also being investigated.…”

mentioning

confidence: 99%

Micro-scanning of a focal plane detector array in a single-photon LiDAR system for improved depth and intensity image reconstruction

Wade¹,

McCarthy²,

Tobin³

et al. 2022

Emerging Imaging and Sensing Technologies for Security and Defence VII

View full text Add to dashboard Cite

Sub-pixel micro-scanning is a relatively simple way of utilizing a low pixel count sensor to better realise the resolution capabilities of a given objective lens. This technique accomplishes this by shifting the sensor array in the image plane through distances less than the pixel dimensions, gathering multiple images from different viewpoints that can be combined into a single, more detailed image. Applying this technique to a single-photon counting light detection and ranging (LiDAR) system allows for improved depth and intensity image reconstruction. Time-correlated single-photon counting (TCSPC) allowed for time-of-flight data to be measured, and the high-sensitivity and picosecond timing resolution this provided enabled us to create high-resolution intensity images and depth maps from distant targets whilst maintaining low average optical output power levels. The LiDAR system operated at a wavelength of 1550 nm, and used a pulsed fiber laser source for flood-illumination of the target scene. The detector was a 32 × 32 InGaAs/InP single-photon avalanche diode detector array mounted on precision translation stages. Operating in the short-wave infrared meant that the system could work at long range in daylight conditions, as the effect of solar background is reduced compared to shorter wavelengths and atmospheric transmission was relatively high. This paper presents depth and intensity profiles taken at a target range of approximately 325 m from the system location. The transceiver system operated at eye-safe, low average optical output power levels, typically below 5 mW.

show abstract

mentioning

confidence: 99%