Low Loss Vertical TiO2/Polymer Hybrid Nano-Waveguides

Abstract

This article proposes a novel demonstration of a low-loss polymer channel hybridized with a titania core leading to a nano-waveguide elongated in the normal direction to the substrate. It is aimed at using the quasi-transverse magnetic (TM) mode as the predominant mode in compact photonic circuitry. A detailed design analysis shows how a thin layer of a higher-refractive index material in a trench within the core of the waveguide can increase the confinement and reduce the propagation losses. This thin layer, produced by atomic layer deposition, covers the entire polymer structure in a conformal manner, ensuring both a reduction of the surface roughness and a stronger field confinement. The trench can be made at any place within the polymer channel and therefore its position can be tuned to obtain asymmetric modal distribution. The waveguide is demonstrated at telecom wavelengths, although the material’s properties enable operation over a large part of the electromagnetic spectrum. We measured propagation losses as low as 1.75 ± 0.32 dB/cm in a 200 nm × 900 nm section of the waveguide core. All processes being mass-production compatible, this study opens a path towards easier integrated-component manufacture.

Strip-loaded Mach–Zehnder interferometer for absolute refractive index sensing

“…The strip-loaded MZI was characterized using the setup configuration shown in Fig. 3 37 . A power meter is connected to a computer for the recording of the measured power.…”